Problems with a usb sound card

Path	csiph.com!weretis.net!feeder4.news.weretis.net!news.unit0.net!news.panservice.it!bofh.it!news.nic.it!robomod
From	niels.misc@noyo.dk
Newsgroups	linux.kernel
Subject	Problems with a usb sound card
Date	Thu, 28 Sep 2017 13:00:01 +0200
Message-ID	<uuEHT-7Wb-1@gated-at.bofh.it> (permalink)
X-Original-To	linux-kernel@vger.kernel.org
X-Greylist	delayed 964 seconds by postgrey-1.27 at vger.kernel.org; Thu, 28 Sep 2017 06:57:03 EDT
Dkim-Signature	v=1; a=rsa-sha256; c=simple/simple; d=noyo.dk; s=20140924; h=from:subject:date:message-id:to:mime-version:content-type: content-transfer-encoding; bh=N9dY7v34qVp2lrnvRSdEAgRTm/YGCQjSy5LkgsXVmyw=; b=kXFHsRiOFPlM+evMyeB76MIkNvCX7QJE6xvJhksA+xrKK4zdlw72vuMZ81ICbZnrsDE1qGktDo6Nj u5QeykoTyJAlaIYFyTmmVE5Ll9ASYaX/8OhxPCUuj1iWaS2QNlU2JrMsIUm8A7+SNskkEjg51rB3F3 vD2Zw6f4Hqljz/U0=
X-Halone-Cookie	27a88aabc8ed3afd9d4251ca47518e08b6d47fe5
X-Halone-ID	82b4a688-a439-11e7-8320-b82a72cffc46
MIME-Version	1.0
Content-Transfer-Encoding	7Bit
Content-Type	text/plain; charset="us-ascii"
Sender	robomod@news.nic.it
List-ID	<linux-kernel.vger.kernel.org>
X-Mailing-List	linux-kernel@vger.kernel.org
Approved	robomod@news.nic.it
Lines	34
Organization	linux.* mail to news gateway
X-Original-Date	Thu, 28 Sep 2017 12:40:56 +0200
X-Original-Message-ID	<8373226.j1cA7ZO7Db@acer.home>
X-Original-Sender	linux-kernel-owner@vger.kernel.org
Xref	csiph.com linux.kernel:1741421

Show key headers only | View raw

Hi!,

In my dmesg, I get:

[    3.078688] usb 1-1.2.6: new full-speed USB device number 9 using ehci-pci
[    3.185101] usb 1-1.2.6: config 1 has an invalid interface number: 6 but 
max is 5
[    3.185135] usb 1-1.2.6: config 1 has an invalid interface number: 7 but 
max is 5
[    3.185143] usb 1-1.2.6: config 1 has no interface number 3
[    3.185149] usb 1-1.2.6: config 1 has no interface number 5
[    3.188716] usb 1-1.2.6: New USB device found, idVendor=1210, 
idProduct=0009
[    3.188732] usb 1-1.2.6: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[    3.188740] usb 1-1.2.6: Product: Lexicon Lambda
[    3.188744] usb 1-1.2.6: Manufacturer: Lexicon

And then later:

[    7.132474] usb 1-1.2.6: 1:1: cannot get freq at ep 0x1
[    7.140529] usb 1-1.2.6: 1:2: cannot get freq at ep 0x1
[    7.149596] usb 1-1.2.6: 2:1: cannot get freq at ep 0x82

The device in question from lsusb:

Bus 001 Device 009: ID 1210:0009 DigiTech

The card lights up on boot, but then turns off again before the boot is 
complete. To get sound working, I have to unplug it and re-plug it. That's 
doable, but annoying. Above is sparse information, please ask for more.

Thanks,
Niels

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

Problems with a usb sound card niels.misc@noyo.dk - 2017-09-28 13:00 +0200

csiph-web