[PATCH v2] Use RX_BUF_SIZE to set size of RX buffer

From	Martyn Welch <martyn.welch@collabora.co.uk>
Newsgroups	linux.kernel
Subject	[PATCH v2] Use RX_BUF_SIZE to set size of RX buffer
Date	2017-09-28 12:10 +0200
Message-ID	<uuDVv-7Gp-5@gated-at.bofh.it> (permalink)
Organization	linux.* mail to news gateway

Show all headers | View raw

The imx serial driver uses PAGE_SIZE when allocating rx_buf, but then
uses RX_BUF_SIZE (which is currently defined as PAGE_SIZE) to describe
the length of the buffer when initialising the scatter gather list.

In order to ensure that this stays consistent, use RX_BUF_SIZE in both
locations.

Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Acked-by: Uwe Kleine-König <u.kleine-könig@pengtronix.de>
---

v2: Add missing SoB and Uwe's Acked-by.

 drivers/tty/serial/imx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 1691ed2..9da109a 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1164,7 +1164,7 @@ static int imx_uart_dma_init(struct imx_port *sport)
 		goto err;
 	}
 
-	sport->rx_buf = kzalloc(PAGE_SIZE, GFP_KERNEL);
+	sport->rx_buf = kzalloc(RX_BUF_SIZE, GFP_KERNEL);
 	if (!sport->rx_buf) {
 		ret = -ENOMEM;
 		goto err;
-- 
1.8.3.1

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

[PATCH v2] Use RX_BUF_SIZE to set size of RX buffer Martyn Welch <martyn.welch@collabora.co.uk> - 2017-09-28 12:10 +0200

csiph-web