Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1735244

Re: Understanding suspend() vs suspend_late() for I2c devices

Show all headers | View raw

On Tuesday, September 19, 2017 7:35:18 PM CEST Rajat Jain wrote:
> Hello folks,
> 
> I'm trying to understand the valid expectations from i2c drivers
> standpoint, from suspend() callback vs suspend_late() callback. The
> Documentation/power/devices.txt states that:
> 
> ==================================================
> For a number of devices it is convenient to split suspend into the
> "quiesce device" and "save device state" phases, in which cases
> suspend_late is meant to do the latter.
> ==================================================
> 
> 1) So it seems that it is fair expectation from a driver, to be able
> to access its own device and its registers in
> suspend_late()/resume_early() call backs?
> 
> 2) For the drivers that provide a controller to a bus (e.g.
> i2c_adapter drivers), is it correct that they should make sure that
> bus operation continues to stay OK even after their suspend() callback
> is executed?(This is because the drivers for the downstream devices -
> eg i2c_client drivers may want to talk to their device in *their*
> suspend_late() callbacks). So bus operations should be suspended by
> the adapter drivers only in their suspend_late() callback routines,
> and not suspend() routines?

Basically, yes, although there seems to be quite a bit of confusion around
that in i2c.

Generally speaking, a parent (or a supplier) device can only be fully
suspended if all of its child (or consumer) devices already have been
fully suspended.

Accordingly, it is better to suspend all of the bus controllers in the
"late suspend" phase and resume them in the "early resume" one.  Then, the
dependent devices can be suspended either in the "suspend" or in the
"late suspend" phase and the PM core should get the dependencies right
(and analogously for resume).

Thanks,
Rafael

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

Understanding suspend() vs suspend_late() for I2c devices Rajat Jain <rajatja@google.com> - 2017-09-19 19:40 +0200
  Re: Understanding suspend() vs suspend_late() for I2c devices "Rafael J. Wysocki" <rjw@rjwysocki.net> - 2017-09-19 22:40 +0200

csiph-web