Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1735847

Re: [PATCH v2] mm: introduce validity check on vm dirtiness settings

Show all headers | View raw

On Tue 19-09-17 19:48:00, Yafang Shao wrote:
> 2017-09-19 16:35 GMT+08:00 Jan Kara <jack@suse.cz>:
> > On Tue 19-09-17 06:53:00, Yafang Shao wrote:
> >> +     if (vm_dirty_bytes == 0 && vm_dirty_ratio == 0 &&
> >> +             (dirty_background_bytes != 0 || dirty_background_ratio != 0))
> >> +             ret = false;
> >
> > Hum, why not just:
> >         if ((vm_dirty_bytes == 0 && vm_dirty_ratio == 0) ||
> >             (dirty_background_bytes == 0 && dirty_background_ratio == 0))
> >                 ret = false;
> >
> > IMHO setting either tunable to 0 is just wrong and actively dangerous...
> >
> 
> Because these four variables all could be set to 0 before, and I'm not
> sure if this
> is needed under some certain conditions, although I think this is
> dangerous but I have
> to keep it as before.
> 
> If you think that is wrong, then I will modified it as you suggested.

OK, I see but see below.

> >>  int dirty_background_ratio_handler(struct ctl_table *table, int write,
> >>               void __user *buffer, size_t *lenp,
> >>               loff_t *ppos)
> >>  {
> >>       int ret;
> >> +     int old_ratio = dirty_background_ratio;
> >>
> >>       ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
> >> -     if (ret == 0 && write)
> >> -             dirty_background_bytes = 0;
> >> +     if (ret == 0 && write) {
> >> +             if (dirty_background_ratio != old_ratio &&
> >> +                     !vm_dirty_settings_valid()) {
> >
> > Why do you check whether new ratio is different here? If it is really
> > needed, it would deserve a comment.
> >
> 
> There're two reseaons,
> 1.  if you set a value same with the old value, it's needn't to do this check.
> 2. there's another behavior that I'm not sure whether it is reaonable.  i.e.
>      if the old value is,
>             vm.dirty_background_bytes = 0;
>             vm.dirty_background_ratio=10;
>       then I execute the bellow command,
>             sysctl -w vm.dirty_background_bytes=0
>      at the end these two values will be,
>             vm.dirty_background_bytes = 0;
>             vm.dirty_background_ratio=0;
> I'm not sure if this is needed under some certain conditons, So I have
> to keep it as before.

OK, this is somewhat the problem of the switching logic between _bytes and
_ratio bytes and also the fact that '0' has a special meaning in these
files. I think the cleanest would be to just refuse writing of '0' into any
of these files which would deal with the problem as well.

								Honza
-- 
Jan Kara <jack@suse.com>
SUSE Labs, CR

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH v2] mm: introduce validity check on vm dirtiness settings Yafang Shao <laoar.shao@gmail.com> - 2017-09-18 17:10 +0200
  Re: [PATCH v2] mm: introduce validity check on vm dirtiness settings Jan Kara <jack@suse.cz> - 2017-09-19 10:40 +0200
    Re: [PATCH v2] mm: introduce validity check on vm dirtiness settings Yafang Shao <laoar.shao@gmail.com> - 2017-09-19 13:50 +0200
      Re: [PATCH v2] mm: introduce validity check on vm dirtiness settings Jan Kara <jack@suse.cz> - 2017-09-20 17:40 +0200
        Re: [PATCH v2] mm: introduce validity check on vm dirtiness settings Yafang Shao <laoar.shao@gmail.com> - 2017-09-21 03:50 +0200

csiph-web