[PATCH v4 5/6] ARM: dts: imx6dl-icore: Add touchscreen node

From	Jagan Teki <jagannadh.teki@gmail.com>
Newsgroups	linux.kernel
Subject	[PATCH v4 5/6] ARM: dts: imx6dl-icore: Add touchscreen node
Date	2017-09-11 11:20 +0200
Message-ID	<uot2O-Wk-15@gated-at.bofh.it> (permalink)
References	<uot2O-Wk-9@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

From: Jagan Teki <jagan@amarulasolutions.com>

max11801 touchscreen on Engicam iCoreM6 DualLite/Solo module is
connected via i2c1, so add max11801: touchscreen@48 on i2c1.

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v4, v3,v2:
- none

 arch/arm/boot/dts/imx6dl-icore.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/imx6dl-icore.dts b/arch/arm/boot/dts/imx6dl-icore.dts
index 360c32e..35211f3 100644
--- a/arch/arm/boot/dts/imx6dl-icore.dts
+++ b/arch/arm/boot/dts/imx6dl-icore.dts
@@ -58,6 +58,15 @@
 	status = "okay";
 };
 
+&i2c1 {
+	max11801: touchscreen@48 {
+		compatible = "maxim,max11801";
+		reg = <0x48>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
 &ldb {
 	status = "okay";
 
-- 
2.7.4

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

[PATCH v4 5/6] ARM: dts: imx6dl-icore: Add touchscreen node Jagan Teki <jagannadh.teki@gmail.com> - 2017-09-11 11:20 +0200

csiph-web