Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1727178

Re: [PATCH v2 1/1] usb:xhci: update condition to select bus->sysdev from parent device

Show all headers | View raw

On 06.09.2017 06:47, Thang Q. Nguyen wrote:
>
>
> On Tue, Sep 5, 2017 at 6:14 PM, Mathias Nyman <mathias.nyman@linux.intel.com <mailto:mathias.nyman@linux.intel.com>> wrote:
>
>     On 24.08.2017 05 <tel:24.08.2017%2005>:53, Thang Q. Nguyen wrote:
>
>         On Sat, Aug 19, 2017 at 10:43 AM, Thang Q. Nguyen <tqnguyen@apm.com <mailto:tqnguyen@apm.com>> wrote:
>
>             From: "Thang Q. Nguyen" <tqnguyen@apm.com <mailto:tqnguyen@apm.com>>
>
>             For commit 4c39d4b949d3 ("usb: xhci: use bus->sysdev for DMA
>             configuration"), sysdev points to devices known to the system firmware
>             or hardware for DMA parameters.
>             However, the parent of the system firmware/hardware device checking
>             logic does not work in ACPI boot mode. This patch updates the formulation
>             to check this case in both DT and ACPI.
>
>             Signed-off-by: Tung Nguyen <tunguyen@apm.com <mailto:tunguyen@apm.com>>
>             Signed-off-by: Thang Q. Nguyen <tqnguyen@apm.com <mailto:tqnguyen@apm.com>>
>             ---
>             Change since v1:
>                - Update codes to work with kernel 4.13-rc5
>             ---
>                drivers/usb/host/xhci-plat.c | 5 ++++-
>                1 file changed, 4 insertions(+), 1 deletion(-)
>
>             diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
>             index c04144b..1bb9729 100644
>             --- a/drivers/usb/host/xhci-plat.c
>             +++ b/drivers/usb/host/xhci-plat.c
>             @@ -187,7 +187,10 @@ static int xhci_plat_probe(struct platform_device *pdev)
>                        * 3. xhci_plat is grandchild of a pci device (dwc3-pci)
>                        */
>                       sysdev = &pdev->dev;
>             -       if (sysdev->parent && !sysdev->of_node && sysdev->parent->of_node)
>             +       if (sysdev->parent && !is_of_node(sysdev->fwnode) &&
>             +                       !is_acpi_device_node(sysdev->fwnode) &&
>             +                       (is_of_node(sysdev->parent->fwnode) ||
>             +                        is_acpi_device_node(sysdev->parent->fwnode)))
>                               sysdev = sysdev->parent;
>                #ifdef CONFIG_PCI
>                       else if (sysdev->parent && sysdev->parent->parent &&
>             --
>             1.8.3.1
>
>         Is there any comment about the patch?
>         With current kernel (4.13.0-rc6), booting the Linux using ACPI boot,
>         kernel is crashed right after probing the USB DWC3 driver with the
>         following messages:
>
>
>     That should work, but the if statements are getting quite elaborate.
>     How about replacing it all with:
>
>     -       sysdev = &pdev->dev;
>     -       if (sysdev->parent && !sysdev->of_node && sysdev->parent->of_node)
>     -               sysdev = sysdev->parent;
>     -#ifdef CONFIG_PCI
>     -       else if (sysdev->parent && sysdev->parent->parent &&
>     -                sysdev->parent->parent->bus == &pci_bus_type)
>     -               sysdev = sysdev->parent->parent;
>     -#endif
>     +
>     +       for (sysdev = &pdev->dev; sysdev; sysdev = sysdev->parent) {
>     +               if (is_of_node(sysdev->fwnode) ||
>     +                   is_acpi_device_node(sysdev->fwnode))
>     +                       break;
>     +       #ifdef CONFIG_PCI
>     +               else if (sysdev->bus == &pci_bus_type)
>     +                       break;
>     +       #endif
>     +       }
>     +
>     +       if (!sysdev)
>     +               sysdev = &pdev->dev
>
>     Does that work for you?
>
>     -Mathias
>
> It works for me. I tested the followings:
> - ACPI boot: 808622B7 (DWC3) and PNP0D10 (xhci-platform)
> - DT boot: snps,dwc3 (DWC3) and xhci-platform.
> Will you apply your codes into 4.14 kernel?

I will, thanks for testing

-Mathias

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

Re: [PATCH v2 1/1] usb:xhci: update condition to select bus->sysdev  from parent device Mathias Nyman <mathias.nyman@linux.intel.com> - 2017-09-05 13:20 +0200
  Re: [PATCH v2 1/1] usb:xhci: update condition to select bus->sysdev  from parent device Mathias Nyman <mathias.nyman@linux.intel.com> - 2017-09-06 08:30 +0200

csiph-web