Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1724206
| From | Ludovic Desroches <ludovic.desroches@microchip.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH RESEND new email address] usb: gadget: udc: atmel: set vbus irqflags explicitly |
| Date | 2017-08-31 15:10 +0200 |
| Message-ID | <ukxol-62o-9@gated-at.bofh.it> (permalink) |
| References | <ukx4Z-5GR-1@gated-at.bofh.it> <ukxeG-5K2-9@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On Thu, Aug 31, 2017 at 02:51:40PM +0200, Nicolas Ferre wrote:
> The driver triggers actions on both edges of the vbus signal.
>
> The former PIO controller was triggering IRQs on both falling and rising edges
> by default. Newer PIO controller don't, so it's better to set it explicitly to
> IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING.
>
> Without this patch we may trigger the connection with host but only on some
> bouncing signal conditions and thus lose connecting events.
>
> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
> Cc: stable <stable@vger.kernel.org> # v4.4+
> ---
> drivers/usb/gadget/udc/atmel_usba_udc.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
> index 98d71400f8a1..a884c022df7a 100644
> --- a/drivers/usb/gadget/udc/atmel_usba_udc.c
> +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
> @@ -29,6 +29,8 @@
> #include <linux/of_gpio.h>
>
> #include "atmel_usba_udc.h"
> +#define USBA_VBUS_IRQFLAGS (IRQF_ONESHOT \
> + | IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING)
>
> #ifdef CONFIG_USB_GADGET_DEBUG_FS
> #include <linux/debugfs.h>
> @@ -2361,7 +2363,7 @@ static int usba_udc_probe(struct platform_device *pdev)
> IRQ_NOAUTOEN);
> ret = devm_request_threaded_irq(&pdev->dev,
> gpio_to_irq(udc->vbus_pin), NULL,
> - usba_vbus_irq_thread, IRQF_ONESHOT,
> + usba_vbus_irq_thread, USBA_VBUS_IRQFLAGS,
> "atmel_usba_udc", udc);
> if (ret) {
> udc->vbus_pin = -ENODEV;
> --
> 2.9.0
>
Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread
[PATCH] usb: gadget: udc: atmel: set vbus irqflags explicitly Nicolas Ferre <nicolas.ferre@microchip.com> - 2017-08-31 14:50 +0200
[PATCH RESEND new email address] usb: gadget: udc: atmel: set vbus irqflags explicitly Nicolas Ferre <nicolas.ferre@microchip.com> - 2017-08-31 15:00 +0200
Re: [PATCH RESEND new email address] usb: gadget: udc: atmel: set vbus irqflags explicitly Ludovic Desroches <ludovic.desroches@microchip.com> - 2017-08-31 15:10 +0200
csiph-web