Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1722226

Re: [PATCH v4 4/5] net: stmmac: dwmac-sun8i: choose internal PHY via phy-is-integrated

Show all headers | View raw

On Sat, Aug 26, 2017 at 11:20:51PM +0200, Andrew Lunn wrote:
> Hi Corentin
> 
> I think we have now all agreed this is an mdio-mux, plus it is also an
> MII mux. We should represent that in device tree. This patchset does
> this. However, as it is now, the mux structure in DT is ignored. All
> it does is search for the phy-is-integrated flags and goes on that.
> 
> I made the comment that the device tree representation cannot be
> implemented using an MDIO mux driver, because of driver loading
> issues.  However, the core of the MDIO mux code is just a library,
> symbols exported as GPL, free for anything to use.
> 
> What i think should happen is the mdio-mux is implemented inside the
> MAC driver, using the mux-core as a library. The device tree structure
> of a mix is then reflected within Linux. The mux switch callback is
> implemented within the MAC driver. So it can reset the MAC when the
> mux is switched. The 'phy-is-integrated' property is then no longer
> needed.

It is stilll needed because some settings (allwinner,leds-active-low for example) are only for integrated phy.

> 
> I would suggest a binding something like:
> 
> emac: ethernet@1c0b000 {
>         compatible = "allwinner,sun8i-h3-emac";
>         syscon = <&syscon>;
>         reg = <0x01c0b000 0x104>;
>         interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
>         interrupt-names = "macirq";
>         resets = <&ccu RST_BUS_EMAC>;
>         reset-names = "stmmaceth";
>         clocks = <&ccu CLK_BUS_EMAC>;
>         clock-names = "stmmaceth";
>         #address-cells = <1>;
>         #size-cells = <0>;
> 
>         phy-handle = <&int_mii_phy>;
>         phy-mode = "mii";
>         allwinner,leds-active-low;
> 
>         mdio: mdio {
>                 #address-cells = <1>;
>                 #size-cells = <0>;
> 	}
> 
> 	mdio-mux {
>                 #address-cells = <1>;
>                 #size-cells = <0>;
> 
> 		mdio@0 {
> 			reg = <0>;
>                         #address-cells = <1>;
>                         #size-cells = <0>;
> 
>                         int_mii_phy: ethernet-phy@1 {
>                                 reg = <1>;
>                                 clocks = <&ccu CLK_BUS_EPHY>;
>                                 resets = <&ccu RST_BUS_EPHY>;
>                         };
>                 };
>                 ext_mdio: mdio@0 {
>                         #address-cells = <1>;
>                         #size-cells = <0>;
> 
>                         ext_rgmii_phy: ethernet-phy@1 {
>                                 reg = <1>;
>                         };
>                 };
>        };
> };
> 

I am trying to do that but I get:
dwmac-sun8i 1c30000.ethernet: Error: Failed to find reg for child /soc/ethernet@1c30000/mdio
dwmac-sun8i 1c30000.ethernet: Error: Failed to find reg for child /soc/ethernet@1c30000/mdio-mux
dwmac-sun8i 1c30000.ethernet: Error: No acceptable child buses found

So it seems that mdio_mux_init() must be run on mdio-mux and not on emac node.
But in the current state it cannot be done.

Do you agree that another mdio_mux_init() must be written ? (taking a of_node (in our case: mdio-mux) instead of a device)
Or do I miss something ?

Regards

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH v4 4/5] net: stmmac: dwmac-sun8i: choose internal PHY via phy-is-integrated Corentin Labbe <clabbe.montjoie@gmail.com> - 2017-08-26 09:40 +0200
  Re: [PATCH v4 4/5] net: stmmac: dwmac-sun8i: choose internal PHY via  phy-is-integrated Andrew Lunn <andrew@lunn.ch> - 2017-08-26 23:30 +0200
    Re: [PATCH v4 4/5] net: stmmac: dwmac-sun8i: choose internal PHY via  phy-is-integrated Corentin Labbe <clabbe.montjoie@gmail.com> - 2017-08-29 10:40 +0200
      Re: [PATCH v4 4/5] net: stmmac: dwmac-sun8i: choose internal PHY via  phy-is-integrated Andrew Lunn <andrew@lunn.ch> - 2017-08-29 16:10 +0200
    Re: [PATCH v4 4/5] net: stmmac: dwmac-sun8i: choose internal PHY via  phy-is-integrated Rob Herring <robh@kernel.org> - 2017-08-31 22:20 +0200
      Re: [PATCH v4 4/5] net: stmmac: dwmac-sun8i: choose internal PHY via  phy-is-integrated Andrew Lunn <andrew@lunn.ch> - 2017-08-31 23:00 +0200
        Re: [PATCH v4 4/5] net: stmmac: dwmac-sun8i: choose internal PHY via phy-is-integrated Rob Herring <robh@kernel.org> - 2017-09-01 16:10 +0200

csiph-web