Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1710704

Re: [linux-sunxi] [PATCH v2] arm64: allwinner: a64: Add A64-OLinuXino initial support

Show all headers | View raw

On Mon, Aug 14, 2017 at 3:34 PM, Jagan Teki <jagannadh.teki@gmail.com> wrote:
> On Mon, Aug 14, 2017 at 12:38 PM, Chen-Yu Tsai <wens@csie.org> wrote:
>> Hi,
>>
>> On Sun, Aug 13, 2017 at 1:54 AM, Jagan Teki <jagannadh.teki@gmail.com> wrote:
>>> From: Jagan Teki <jagan@amarulasolutions.com>
>>>
>>> OLimex A64-OLinuXino is an open-source hardware board
>>> using the Allwinner A64 SOC.
>>>
>>> OLimex A64-OLinuXino has
>>> - A64 Quad-core Cortex-A53 64bit
>>> - 1GB or 2GB RAM DDR3L @ 672Mhz
>>> - microSD slot and 4/8/16GB eMMC
>>> - Debug TTL UART
>>> - HDMI
>>> - LCD
>>> - IR receiver
>>> - 5V DC power supply
>>
>> Have you tried out Ethernet?
>
> Not, tested yet. Will send separate patch.

OK.

[...]

>>> +
>>> +&reg_aldo2 {
>>> +       regulator-always-on;
>>> +       regulator-min-microvolt = <3300000>;
>>> +       regulator-max-microvolt = <3300000>;
>>
>> Schematic says 1.8V?
>
> I saw ALD02 VCC-PL=3.3v on schematic.

Ah. I see they changed it in a rev. B. Lets use 3.3V then.

>>
>>> +       regulator-name = "vcc-pl";
>>> +};
>>> +
>>> +&reg_aldo3 {
>>> +       regulator-always-on;
>>> +       regulator-min-microvolt = <3000000>;
>>> +       regulator-max-microvolt = <3000000>;
>>> +       regulator-name = "vcc-pll-avcc";
>>> +};
>>> +
>>> +&reg_dcdc1 {
>>> +       regulator-always-on;
>>> +       regulator-min-microvolt = <3300000>;
>>> +       regulator-max-microvolt = <3300000>;
>>> +       regulator-name = "vcc-3v3";
>>> +};
>>> +
>>> +&reg_dcdc2 {
>>> +       regulator-always-on;
>>> +       regulator-min-microvolt = <1100000>;
>>> +       regulator-max-microvolt = <1100000>;
>>
>> The SoC has a wider range than a fixed voltage for the CPUs.
>
> So, max 1.1v can't enough CPUs? thought similar behavior with pine64?

The recommended operating conditions says 1.04 ~ 1.3 V for CPUx,
while the typical voltage is 1.1V. The regulator constraints should
match the datasheet, especially for power rails that are involved in
DVFS.

ChenYu

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH v2] arm64: allwinner: a64: Add A64-OLinuXino initial support Jagan Teki <jagannadh.teki@gmail.com> - 2017-08-12 20:00 +0200
  Re: [linux-sunxi] [PATCH v2] arm64: allwinner: a64: Add A64-OLinuXino  initial support Chen-Yu Tsai <wens@csie.org> - 2017-08-14 09:10 +0200
    Re: [linux-sunxi] [PATCH v2] arm64: allwinner: a64: Add A64-OLinuXino  initial support Jagan Teki <jagannadh.teki@gmail.com> - 2017-08-14 09:40 +0200
      Re: [linux-sunxi] [PATCH v2] arm64: allwinner: a64: Add A64-OLinuXino  initial support Chen-Yu Tsai <wens@csie.org> - 2017-08-14 10:00 +0200
        Re: [linux-sunxi] [PATCH v2] arm64: allwinner: a64: Add A64-OLinuXino  initial support Jagan Teki <jagannadh.teki@gmail.com> - 2017-08-14 11:10 +0200
          Re: [linux-sunxi] [PATCH v2] arm64: allwinner: a64: Add A64-OLinuXino  initial support Chen-Yu Tsai <wens@csie.org> - 2017-08-14 11:20 +0200

csiph-web