Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1711935
| From | Adrian Hunter <adrian.hunter@intel.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [RFC PATCH 2/7] mmc: sdhci: Add quirk to indicate controller supports ADMA2 |
| Date | 2017-08-15 09:50 +0200 |
| Message-ID | <ueELT-6RV-13@gated-at.bofh.it> (permalink) |
| References | <ubSLn-2uu-5@gated-at.bofh.it> <ubSLp-2uu-35@gated-at.bofh.it> |
| Organization | Intel Finland Oy, Registered Address: PL 281, 00181 Helsinki, Business Identity Code: 0357606 - 4, Domiciled in Helsinki |
On 07/08/17 19:01, Kishon Vijay Abraham I wrote:
> TI's implementation of sdhci controller used in DRA7 SoC's doesn't
> have SDHCI_CAN_DO_ADMA2 set in CAPA register though it supports
> ADMA2. Add quirk to support using ADMA2 even if the controller reports
> incorrect capability in CAPA.
A quirk is not needed for this. Just call sdhci_read_caps() and change
host->caps before calling sdhci_add_host().
>
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
> drivers/mmc/host/sdhci.c | 3 ++-
> drivers/mmc/host/sdhci.h | 2 ++
> 2 files changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index ece3751d2a25..fff0baadbc3e 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -3264,7 +3264,8 @@ int sdhci_setup_host(struct sdhci_host *host)
> }
>
> if ((host->version >= SDHCI_SPEC_200) &&
> - (host->caps & SDHCI_CAN_DO_ADMA2))
> + ((host->caps & SDHCI_CAN_DO_ADMA2) ||
> + (host->quirks2 & SDHCI_QUIRK2_FORCE_ADMA)))
> host->flags |= SDHCI_USE_ADMA;
>
> if ((host->quirks & SDHCI_QUIRK_BROKEN_ADMA) &&
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index 6905131f603d..d778034e324d 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -437,6 +437,8 @@ struct sdhci_host {
> #define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN (1<<15)
> /* Controller does not have CRC stripped in Command Response */
> #define SDHCI_QUIRK2_NO_CRC_STRIPPING (1<<16)
> +/* Controller has bad caps bits, but really supports DMA */
> +#define SDHCI_QUIRK2_FORCE_ADMA (1<<17)
>
> int irq; /* Device IRQ */
> void __iomem *ioaddr; /* Mapped address */
>
Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread
Re: [RFC PATCH 2/7] mmc: sdhci: Add quirk to indicate controller supports ADMA2 Adrian Hunter <adrian.hunter@intel.com> - 2017-08-15 09:50 +0200 Re: [RFC PATCH 2/7] mmc: sdhci: Add quirk to indicate controller supports ADMA2 Kishon Vijay Abraham I <kishon@ti.com> - 2017-08-17 07:40 +0200
csiph-web