[PATCH v3 0/7] Add rk3328 pwm support

From	David Wu <david.wu@rock-chips.com>
Newsgroups	linux.kernel
Subject	[PATCH v3 0/7] Add rk3328 pwm support
Date	2017-08-08 17:50 +0200
Message-ID	<uceLT-1Xt-7@gated-at.bofh.it> (permalink)
Organization	linux.* mail to news gateway

Show all headers | View raw

There are two features of rk3328 pwm module.
 - PWM APB and function clocks are different.
 - Add pwm atomic hardware update

David Wu (7):
  pwm: rockchip: Add APB and function both clocks support
  pwm: rockchip: Remove the judge from return value of pwm_config
  pwm: rockchip: Use pwm_apply instead of the pwm_enable
  pwm: rockchip: Move the configuration of polarity from
    rockchip_pwm_set_enable() to rockchip_pwm_config()
  pwm: rockchip: Use same pwm ops for each IP
  pwm: rockchip: Add rk3328 pwm support
  arm64: dts: rockchip: Add pwm nodes for rk3328

 .../devicetree/bindings/pwm/pwm-rockchip.txt       |   8 +-
 arch/arm64/boot/dts/rockchip/rk3328.dtsi           |  45 ++++
 drivers/pwm/pwm-rockchip.c                         | 281 +++++++++++----------
 3 files changed, 199 insertions(+), 135 deletions(-)

-- 
1.9.1

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

[PATCH v3 0/7] Add rk3328 pwm support David Wu <david.wu@rock-chips.com> - 2017-08-08 17:50 +0200
  [PATCH v3 2/7] pwm: rockchip: Remove the judge from return value of pwm_config David Wu <david.wu@rock-chips.com> - 2017-08-08 17:50 +0200
  [PATCH v3 3/7] pwm: rockchip: Use pwm_apply instead of the pwm_enable David Wu <david.wu@rock-chips.com> - 2017-08-08 17:50 +0200

csiph-web