Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1708426
| From | Masahiro Yamada <yamada.masahiro@socionext.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH v3 1/2] ARM: dts: uniphier: add nodes of thermal monitor and thermal zone for PXs2 |
| Date | 2017-08-10 12:50 +0200 |
| Message-ID | <ucTcm-4sX-19@gated-at.bofh.it> (permalink) |
| References | <tZR8m-5K7-13@gated-at.bofh.it> <tZR8m-5K7-11@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
Hayashi-san
2017-07-05 20:53 GMT+09:00 Kunihiko Hayashi <hayashi.kunihiko@socionext.com>:
> Add nodes of thermal monitor and thermal zone for UniPhier PXs2 SoC.
> The thermal monitor is included in sysctrl.
> Furthermore, add cpuN labels for reference in cooling-device property.
>
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---
Please add socionext,tmod-calibration
in case the efuse is not brown.
>
> + thermal-zones {
> + cpu_thermal {
> + polling-delay-passive = <250>; /* 250ms */
> + polling-delay = <1000>; /* 1000ms */
> + thermal-sensors = <&pvtctl>;
> +
> + trips {
> + cpu_crit: cpu_crit {
> + temperature = <95000>; /* 95C */
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + cpu_alert: cpu_alert {
> + temperature = <85000>; /* 85C */
> + hysteresis = <2000>;
> + type = "passive";
> + };
> + };
> +
> + cooling-maps {
> + map {
> + trip = <&cpu_alert>;
> + cooling-device = <&cpu0 (-1) (-1)>;
> + };
After all, I decided to use dt-bindings headers.
Could you use THERMAL_NO_LIMIT for clarification?
--
Best Regards
Masahiro Yamada
Back to linux.kernel | Previous | Next | Find similar | Unroll thread
Re: [PATCH v3 1/2] ARM: dts: uniphier: add nodes of thermal monitor and thermal zone for PXs2 Masahiro Yamada <yamada.masahiro@socionext.com> - 2017-08-10 12:50 +0200
csiph-web