[PATCH 07/18] staging: typec: fusb302: Use client->irq as irq if set

From	Hans de Goede <hdegoede@redhat.com>
Newsgroups	linux.kernel
Subject	[PATCH 07/18] staging: typec: fusb302: Use client->irq as irq if set
Date	2017-08-06 14:40 +0200
Message-ID	<ubt0D-2al-45@gated-at.bofh.it> (permalink)
References	<ubt0C-2al-7@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

The fusb302 is also used on x86 systems where the platform code sets
the irq in client->irq and there is no gpio named fcs,int_n.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/staging/typec/fusb302/fusb302.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/typec/fusb302/fusb302.c b/drivers/staging/typec/fusb302/fusb302.c
index 8ceaef8ecf17..be454b5ff6c7 100644
--- a/drivers/staging/typec/fusb302/fusb302.c
+++ b/drivers/staging/typec/fusb302/fusb302.c
@@ -1735,9 +1735,13 @@ static int fusb302_probe(struct i2c_client *client,
 		goto destroy_workqueue;
 	}
 
-	ret = init_gpio(chip);
-	if (ret < 0)
-		goto destroy_workqueue;
+	if (client->irq) {
+		chip->gpio_int_n_irq = client->irq;
+	} else {
+		ret = init_gpio(chip);
+		if (ret < 0)
+			goto destroy_workqueue;
+	}
 
 	chip->tcpm_port = tcpm_register_port(&client->dev, &chip->tcpc_dev);
 	if (IS_ERR(chip->tcpm_port)) {
-- 
2.13.3

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

[PATCH 07/18] staging: typec: fusb302: Use client->irq as irq if set Hans de Goede <hdegoede@redhat.com> - 2017-08-06 14:40 +0200

csiph-web