Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1703974
| From | Abhishek Sahu <absahu@codeaurora.org> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH v2 12/25] dt-bindings: qcom_nandc: QPIC NAND documentation |
| Date | 2017-08-04 15:20 +0200 |
| Message-ID | <uaKGf-7th-47@gated-at.bofh.it> (permalink) |
| References | (1 earlier) <u4VO2-85k-23@gated-at.bofh.it> <u6R3z-KM-5@gated-at.bofh.it> <u7d45-6px-1@gated-at.bofh.it> <u9lqz-8oa-27@gated-at.bofh.it> <uaKdb-71s-13@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On 2017-08-04 18:15, Boris Brezillon wrote: > On Mon, 31 Jul 2017 21:35:57 +0530 > Abhishek Sahu <absahu@codeaurora.org> wrote: > >> On 2017-07-26 00:13, Abhishek Sahu wrote: >> > On 2017-07-25 00:47, Rob Herring wrote: >> >> On Wed, Jul 19, 2017 at 05:18:00PM +0530, Abhishek Sahu wrote: >> >>> 1. QPIC NAND will use compatible string "qcom,qpic-nandc-v1.4.0" >> >>> 2. QPIC NAND will 3 BAM channels: command, data tx and data rx >> >>> while EBI2 NAND uses only single ADM channel. >> >>> 3. CRCI is only required for ADM DMA and its not required for >> >>> QPIC NAND. >> >>> >> >>> Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> >> >>> --- >> >>> .../devicetree/bindings/mtd/qcom_nandc.txt | 54 >> >>> ++++++++++++++++++++-- >> >>> 1 file changed, 51 insertions(+), 3 deletions(-) >> >>> >> >>> diff --git a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt >> >>> b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt >> >>> index b24adfe..8efaeb0 100644 >> >>> --- a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt >> >>> +++ b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt >> >>> @@ -1,13 +1,15 @@ >> >>> * Qualcomm NAND controller >> >>> >> >>> Required properties: >> >>> -- compatible: should be "qcom,ebi2-nandc" - EBI2 NAND which uses >> >>> ADM >> >>> - DMA like IPQ8064. >> >>> - >> >>> +- compatible: must be one of the following: >> >>> + * "qcom,ebi2-nandc" - EBI2 NAND which uses ADM DMA like IPQ8064. >> >>> + * "qcom,qpic-nandc-v1.4.0" - QPIC NAND v1.4.0 which uses BAM DMA >> >>> like IPQ4019. >> >> >> >> Looks like you have 2 SoCs and 2 versions of h/w. Use SoC specific >> >> compatible strings. >> > >> > We have 3 versions of NAND HW currently. >> > EBI2, >> > QPIC version 1.4.0 >> > QPIC version 1.5.0 >> > >> > and multiple Qualcomm SoCs which use any one of these. >> > >> > The original plan was to have compatible string for NAND version since >> > same NAND hardware is being in different SoC and SoC dtsi will simply >> > use its NAND version compatible string like other Qualcomm hardwares >> > >> > >> > http://elixir.free-electrons.com/linux/latest/source/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt >> > >> > http://elixir.free-electrons.com/linux/latest/source/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt >> > >> >> Following are the partial list for NAND controller and supported >> SoC >> >> EBI2: IPQ8064, APQ8064, MSM7xx, MDM9x15 >> QPIC v1.4.0 MDM9x25, MDM9x35, MDM9x45, IPQ4019 >> QPIC v1.5.0 MDM9x55, IPQ8074 >> >> so could we use NAND controller specific compatible strings instead >> of >> SoC >> since it will easy to maintain? > > Nope, though you can re-use the compatible of an old SoC for new SoCs > if the IP did not change. > > For example: > > - EBI2: compatible = "qcom,ipq8064" > - QPIC 1.4: compatible = "qcom,mdm9x25" > - QPIC 1.5: compatible = "qcom,mdm9x55" > > Note that we usually pick the oldest SoC that started embedding an IP > when choosing the compatible. So my suggestion assumes IPQ8064 is older > than APQ8064, MSM7xx and MDM9x15. Thanks Boris for detailed clarification. Then I will change the patch to use SoC specific compatible string. Its better to use qcom,ipq4019 for 1.4.0 and qcom,ipq8074 for 1.5.0 since we don't have other SoC in upstream and I have tested the NAND driver on these IPQ SoC's.
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
Re: [PATCH v2 12/25] dt-bindings: qcom_nandc: QPIC NAND documentation Abhishek Sahu <absahu@codeaurora.org> - 2017-07-31 18:10 +0200
Re: [PATCH v2 12/25] dt-bindings: qcom_nandc: QPIC NAND documentation Boris Brezillon <boris.brezillon@free-electrons.com> - 2017-08-04 14:50 +0200
Re: [PATCH v2 12/25] dt-bindings: qcom_nandc: QPIC NAND documentation Abhishek Sahu <absahu@codeaurora.org> - 2017-08-04 15:20 +0200
Re: [PATCH v2 12/25] dt-bindings: qcom_nandc: QPIC NAND documentation Boris Brezillon <boris.brezillon@free-electrons.com> - 2017-08-04 15:30 +0200
csiph-web