Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1692806

Re: [PATCH -next] staging: pi433: depends on SPI

From "Wolf Entwicklungen" <Marcus.Wolf@Wolf-Entwicklungen.de>
Newsgroups linux.kernel
Subject Re: [PATCH -next] staging: pi433: depends on SPI
Date 2017-07-20 13:10 +0200
Message-ID <u5hve-6vT-35@gated-at.bofh.it> (permalink)
References <u572O-7mO-7@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


Reviewed-by: Marcus Wolf <linux@wolf-entwicklungen.de>

Am Do, 20.07.2017, 01:58 schrieb Randy Dunlap:
> From: Randy Dunlap <rdunlap@infradead.org>
>
> The pi433 driver uses SPI interfaces so it should depend on SPI.
> Also, the "default n" can be removed since that is already the
> default.
>
> Fixes these build errors when SPI is not enabled:
>
> drivers/staging/pi433/pi433_if.o: In function `pi433_probe':
> pi433_if.c:(.text+0x1135): undefined reference to `spi_setup'
> pi433_if.c:(.text+0x1177): undefined reference to `spi_write_then_read'
> drivers/staging/pi433/pi433_if.o: In function `pi433_init':
> pi433_if.c:(.init.text+0xb8): undefined reference to `__spi_register_driver'
> drivers/staging/pi433/rf69.o: In function `rf69_read_fifo':
> rf69.c:(.text+0x102): undefined reference to `spi_sync'
> drivers/staging/pi433/rf69.o: In function `rf69_write_fifo':
> rf69.c:(.text+0x248): undefined reference to `spi_sync'
> drivers/staging/pi433/rf69.o: In function `rf69_read_reg':
> rf69.c:(.text+0x290): undefined reference to `spi_write_then_read'
> drivers/staging/pi433/rf69.o: In function `rf69_write_reg':
> rf69.c:(.text+0x523): undefined reference to `spi_sync'
>
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Cc: Marcus Wolf <linux@wolf-entwicklungen.de>
> ---
>  drivers/staging/pi433/Kconfig |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> --- next-2017-0719.orig/drivers/staging/pi433/Kconfig
> +++ next-2017-0719/drivers/staging/pi433/Kconfig
> @@ -1,6 +1,6 @@
>  config PI433
>          tristate "Pi433 - a 433MHz radio module for Raspberry Pi"
> -        default n
> +        depends on SPI
>          ---help---
>            This option allows you to enable support for the radio module Pi433.
>
>
>
>
>

Back to linux.kernel | Previous | NextPrevious in thread | Find similar | Unroll thread


Thread

[PATCH -next] staging: pi433: depends on SPI Randy Dunlap <rdunlap@infradead.org> - 2017-07-20 02:00 +0200
  Re: [PATCH -next] staging: pi433: depends on SPI "Wolf Entwicklungen" <Marcus.Wolf@Wolf-Entwicklungen.de> - 2017-07-20 13:10 +0200

csiph-web