Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1693442

Re: [PATCH v2 04/10] mmc: sunxi: Support controllers that can use both old and new timings

Show all headers | View raw

[Multipart message — attachments visible in raw view] - view raw

On Thu, Jul 20, 2017 at 11:44:46AM +0800, Chen-Yu Tsai wrote:
> On the SoCs that introduced the new timing mode for MMC controllers,
> both the old (where the clock delays are set in the CCU) and new
> (where the clock delays are set in the MMC controller) timing modes
> are available, and we have to support them both. However there are
> two bits that control which mode is active. One is in the CCU, the
> other is in the MMC controller. The settings on both sides must be
> the same, or nothing will work.
> 
> The sunxi-ng clock driver provides an API to query and set the
> active timing mode. At probe time, we try to set the active mode
> to the "new timing mode". If it succeeds, we can then use the MMC
> controller in the new mode. If not, we fall back to the old mode.
> 
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>

Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Thanks!
Maxime
-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH v2 04/10] mmc: sunxi: Support controllers that can use both old and new timings Chen-Yu Tsai <wens@csie.org> - 2017-07-20 05:50 +0200
  Re: [PATCH v2 04/10] mmc: sunxi: Support controllers that can use  both old and new timings Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-21 09:30 +0200

csiph-web