Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1688794

Re: [PATCH 05/11] mmc: sunxi: Support controllers that can use both old and new timings

Show all headers | View raw

[Multipart message — attachments visible in raw view] - view raw

Hi,

On Fri, Jul 14, 2017 at 02:42:56PM +0800, Chen-Yu Tsai wrote:
> On the SoCs that introduced the new timing mode for MMC controllers,
> both the old (where the clock delays are set in the CCU) and new
> (where the clock delays are set in the MMC controller) timing modes
> are available, and we have to support them both. However there are
> two bits that control which mode is active. One is in the CCU, the
> other is in the MMC controller. The settings on both sides must be
> the same, or nothing will work.
> 
> The CCU's get/set_phase callbacks return -ENOTSUPP when the new
> timing mode is active. This provides a way to know which mode is
> active on that side, and we can set the bit on the MMC controller
> side accordingly.
> 
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
>  drivers/mmc/host/sunxi-mmc.c | 34 ++++++++++++++++++++++++++++++----
>  1 file changed, 30 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
> index 0fb4e4c119e1..56e45c65b52d 100644
> --- a/drivers/mmc/host/sunxi-mmc.c
> +++ b/drivers/mmc/host/sunxi-mmc.c
> @@ -22,6 +22,7 @@
>  #include <linux/err.h>
>  
>  #include <linux/clk.h>
> +#include <linux/clk/sunxi-ng.h>
>  #include <linux/gpio.h>
>  #include <linux/platform_device.h>
>  #include <linux/spinlock.h>
> @@ -259,7 +260,7 @@ struct sunxi_mmc_cfg {
>  	/* Does DATA0 needs to be masked while the clock is updated */
>  	bool mask_data0;
>  
> -	bool needs_new_timings;
> +	bool has_new_timings;

I think we should have both, it's a bit different. Newer SoCs like the
A64 can only operate using new timings, while the older ones can
operate in both modes.

In one case, we're forced to use it, in the other one it's a
policy. We should differentiate both cases.

Looks good otherwise, thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH 00/11] ARM: sun8i: a83t: Add support for MMC controllers Chen-Yu Tsai <wens@csie.org> - 2017-07-14 08:50 +0200
  [PATCH 11/11] ARM: dts: sun8i: a83t: h8homlet: Enable micro-SD card and onboard eMMC Chen-Yu Tsai <wens@csie.org> - 2017-07-14 08:50 +0200
  [PATCH 04/11] mmc: sunxi: Keep default timing phase settings for new timing mode Chen-Yu Tsai <wens@csie.org> - 2017-07-14 08:50 +0200
    Re: [PATCH 04/11] mmc: sunxi: Keep default timing phase settings for  new timing mode Ulf Hansson <ulf.hansson@linaro.org> - 2017-07-14 11:20 +0200
      Re: [PATCH 04/11] mmc: sunxi: Keep default timing phase settings for  new timing mode Chen-Yu Tsai <wens@csie.org> - 2017-07-14 11:50 +0200
    Re: [PATCH 04/11] mmc: sunxi: Keep default timing phase settings for  new timing mode Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-17 11:20 +0200
    Re: [PATCH 04/11] mmc: sunxi: Keep default timing phase settings for  new timing mode Ulf Hansson <ulf.hansson@linaro.org> - 2017-07-17 12:40 +0200
  [PATCH 09/11] ARM: dts: sun8i: a83t: Add pingroup for 8-bit eMMC on mmc2 Chen-Yu Tsai <wens@csie.org> - 2017-07-14 08:50 +0200
  [PATCH 01/11] ARM: dts: sun8i: a83t: Switch to CCU device tree binding macros Chen-Yu Tsai <wens@csie.org> - 2017-07-14 08:50 +0200
    Re: [PATCH 01/11] ARM: dts: sun8i: a83t: Switch to CCU device tree  binding macros Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-17 11:10 +0200
  [PATCH 02/11] clk: sunxi-ng: Add interface to query or configure MMC timing modes. Chen-Yu Tsai <wens@csie.org> - 2017-07-14 08:50 +0200
    Re: [PATCH 02/11] clk: sunxi-ng: Add interface to query or configure  MMC timing modes. Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-17 11:20 +0200
  [PATCH 08/11] ARM: dts: sun8i: a83t: Add MMC controller device nodes Chen-Yu Tsai <wens@csie.org> - 2017-07-14 08:50 +0200
    Re: [PATCH 08/11] ARM: dts: sun8i: a83t: Add MMC controller device  nodes Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-17 11:30 +0200
  [PATCH 07/11] mmc: sunxi: Add support for A83T eMMC (MMC2) Chen-Yu Tsai <wens@csie.org> - 2017-07-14 08:50 +0200
    Re: [PATCH 07/11] mmc: sunxi: Add support for A83T eMMC (MMC2) Rob Herring <robh@kernel.org> - 2017-07-17 21:00 +0200
  [PATCH 05/11] mmc: sunxi: Support controllers that can use both old and new timings Chen-Yu Tsai <wens@csie.org> - 2017-07-14 08:50 +0200
    Re: [PATCH 05/11] mmc: sunxi: Support controllers that can use both  old and new timings Ulf Hansson <ulf.hansson@linaro.org> - 2017-07-14 11:30 +0200
      Re: [PATCH 05/11] mmc: sunxi: Support controllers that can use both  old and new timings Chen-Yu Tsai <wens@csie.org> - 2017-07-14 11:50 +0200
        Re: [PATCH 05/11] mmc: sunxi: Support controllers that can use both  old and new timings Ulf Hansson <ulf.hansson@linaro.org> - 2017-07-14 12:00 +0200
          Re: [PATCH 05/11] mmc: sunxi: Support controllers that can use both  old and new timings Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-17 11:30 +0200
    Re: [PATCH 05/11] mmc: sunxi: Support controllers that can use both  old and new timings Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-17 11:20 +0200

csiph-web