[PATCH] arm64: dts: exynos: Remove the te-gpios property in the TM2 boards

From	Hoegeun Kwon <hoegeun.kwon@samsung.com>
Newsgroups	linux.kernel
Subject	[PATCH] arm64: dts: exynos: Remove the te-gpios property in the TM2 boards
Date	2017-04-25 04:00 +0200
Message-ID	<tzXVL-6sb-1@gated-at.bofh.it> (permalink)
References	<tzXVL-6sb-3@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

The decon uses HW-TRIGGER, so TE interrupt is not necessary.
Therefore, remove the te-gpios property in the TM2 dts.

Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
---
 arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
index 3ff9527..23191eb 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -60,7 +60,6 @@
 		vci-supply = <&ldo28_reg>;
 		reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
 		enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
-		te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
 	};
 };
 
-- 
1.9.1

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

[PATCH] arm64: dts: exynos: Remove the te-gpios property in the TM2  boards Hoegeun Kwon <hoegeun.kwon@samsung.com> - 2017-04-25 04:00 +0200
  Re: [PATCH] arm64: dts: exynos: Remove the te-gpios property in the  TM2 boards Inki Dae <inki.dae@samsung.com> - 2017-04-25 09:20 +0200
  Re: [PATCH] arm64: dts: exynos: Remove the te-gpios property in the  TM2 boards Krzysztof Kozlowski <krzk@kernel.org> - 2017-04-26 09:30 +0200

csiph-web