Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1629122

Re: [PATCH v2 02/11] soc/fsl/qbman: Use shared-dma-pool for QMan private memory allocations

Show all headers | View raw

On Wed, 2017-04-19 at 16:48 -0400, Roy Pledge wrote:
> @@ -727,10 +730,81 @@ static int fsl_qman_probe(struct platform_device
> *pdev)
>  		qm_channel_caam = QMAN_CHANNEL_CAAM_REV3;
>  	}
>  
> -	ret = zero_priv_mem(dev, node, fqd_a, fqd_sz);
> -	WARN_ON(ret);
> -	if (ret)
> -		return -ENODEV;
> +	if (fqd_a) {
> +#ifdef CONFIG_PPC
> +		/*
> +		 * For PPC backward DT compatibility
> +		 * FQD memory MUST be zero'd by software
> +		 */
> +		zero_priv_mem(fqd_a, fqd_sz);
> +#endif

Should probably warn if you get here on non-PPC rather than silently accepting
it.

> +	} else {
> +		/*
> +		 * Order of memory regions is assumed as FQD followed by
> PFDR
> +		 * in order to ensure allocations from the correct regions
> the
> +		 * driver initializes then allocates each piece in order
> +		 */

This should be explicitly specified in the binding rather than here.



> +		ret = of_reserved_mem_device_init_by_idx(dev, dev->of_node, 
> 0);
> +		if (ret) {
> +			dev_err(dev, "of_reserved_mem_device_init_by_idx(0)
> failed 0x%x\n",
> +				ret);
> +			return -ENODEV;
> +		}
> +		mem_node = of_parse_phandle(dev->of_node, "memory-region",
> 0);
> +		if (mem_node) {
> +			ret = of_property_read_u64(mem_node, "size",
> &size);
> +			if (ret) {
> +				dev_err(dev, "FQD: of_address_to_resource
> fails 0x%x\n",
> +					ret);
> +				return -ENODEV;
> +			}
> +			fqd_sz = size;
> +		} else {
> +			dev_err(dev, "No memory-region found for FQD\n");
> +			return -ENODEV;
> +		}
> +		if (!dma_zalloc_coherent(dev, fqd_sz, &fqd_a, 0)) {
> +			dev_err(dev, "Alloc FQD memory failed\n");
> +			return -ENODEV;
> +		}
> +
> +		/*
> +		 * Disassociate the FQD reseverd memory area from the
> device
> +		 * because a device can only have one DMA memory area. This
> +		 * should be fine since the memory is allocated and
> initialized
> +		 * and only ever accessed by the QMan device from now on
> +		 */
> +		of_reserved_mem_device_release(dev);

s/reseverd/reserved/


> +	}
> +	dev_info(dev, "Allocated FQD 0x%llx 0x%zx\n", fqd_a, fqd_sz);

dev_dbg()?

-Scott

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

Re: [PATCH v2 02/11] soc/fsl/qbman: Use shared-dma-pool for QMan  private memory allocations Scott Wood <oss@buserror.net> - 2017-04-24 03:50 +0200

csiph-web