Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1625932
| From | Benjamin Gaignard <benjamin.gaignard@linaro.org> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH] iio: stm32 trigger: fix sampling_frequency read |
| Date | 2017-04-19 10:40 +0200 |
| Message-ID | <txTjA-197-17@gated-at.bofh.it> (permalink) |
| References | <ttAIx-6Aj-1@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
2017-04-07 13:53 GMT+02:00 Fabrice Gasnier <fabrice.gasnier@st.com>:
> When prescaler (PSC) is 0, it means div factor is 1: counter clock
> frequency is equal to input clk / (PSC + 1).
> When reload value is 8 for example, counter counts 9 cycles, from 0 to 8.
> This is handled in frequency write routine, by writing respectively:
> - prescaler - 1 to PSC
> - reload value - 1 to ARR
> This fix does the opposite when reading the frequency from PSC and ARR:
> - prescaler is PSC + 1
> - reload value is ARR + 1
>
> Thus, PSC may be 0, depending on requested sampling frequency (div 1).
> In this case, reading freq wrongly reports 0, instead of computing and
> reporting correct value.
> Remove test on !psc and !arr.
>
> Small test on stm32f4 (example on tim1_trgo), before this fix:
> $ cd /sys/bus/iio/devices/triggerX
> $ echo 10000 > sampling_frequency
> $ cat sampling_frequency
> 0
>
> After this fix:
> $ echo 10000 > sampling_frequency
> $ cat sampling_frequency
> 10000
>
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
> ---
> drivers/iio/trigger/stm32-timer-trigger.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/iio/trigger/stm32-timer-trigger.c b/drivers/iio/trigger/stm32-timer-trigger.c
> index 994b96d..5ee362b 100644
> --- a/drivers/iio/trigger/stm32-timer-trigger.c
> +++ b/drivers/iio/trigger/stm32-timer-trigger.c
> @@ -152,10 +152,10 @@ static ssize_t stm32_tt_read_frequency(struct device *dev,
> regmap_read(priv->regmap, TIM_PSC, &psc);
> regmap_read(priv->regmap, TIM_ARR, &arr);
>
> - if (psc && arr && (cr1 & TIM_CR1_CEN)) {
> + if (cr1 & TIM_CR1_CEN) {
> freq = (unsigned long long)clk_get_rate(priv->clk);
> - do_div(freq, psc);
> - do_div(freq, arr);
> + do_div(freq, psc + 1);
> + do_div(freq, arr + 1);
> }
>
> return sprintf(buf, "%d\n", (unsigned int)freq);
> --
> 1.9.1
>
Acked-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Back to linux.kernel | Previous | Next | Find similar | Unroll thread
Re: [PATCH] iio: stm32 trigger: fix sampling_frequency read Benjamin Gaignard <benjamin.gaignard@linaro.org> - 2017-04-19 10:40 +0200
csiph-web