Re: [PATCH 3/3] powernv:idle: Set LPCR_UPRT on wakeup from deep-stop

From	Michael Ellerman <mpe@ellerman.id.au>
Newsgroups	linux.kernel
Subject	Re: [PATCH 3/3] powernv:idle: Set LPCR_UPRT on wakeup from deep-stop
Date	2017-04-13 12:10 +0200
Message-ID	<tvJRo-1sn-19@gated-at.bofh.it> (permalink)
References	(1 earlier) <tvoWC-3Wi-9@gated-at.bofh.it> <tvEeZ-5SJ-3@gated-at.bofh.it> <tvEoF-5Wg-3@gated-at.bofh.it> <tvGqt-7kR-3@gated-at.bofh.it> <tvHcR-7Xz-3@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

Nicholas Piggin <npiggin@gmail.com> writes:

> On Thu, 13 Apr 2017 16:27:34 +1000
> Michael Neuling <mikey@neuling.org> wrote:
>
>> On Thu, 2017-04-13 at 14:12 +1000, Benjamin Herrenschmidt wrote:
>> > On Thu, 2017-04-13 at 09:28 +0530, Aneesh Kumar K.V wrote:  
>> > > >   #endif
>> > > >        mtctr   r12
>> > > >        bctrl
>> > > > +/*
>> > > > + * cur_cpu_spec->cpu_restore would restore LPCR to a
>> > > > + * sane value that is set at early boot time,
>> > > > + * thereby clearing LPCR_UPRT.
>> > > > + * LPCR_UPRT is required if we are running in Radix mode.
>> > > > + * Set it here if that be the case.
>> > > > + */
>> > > > +BEGIN_MMU_FTR_SECTION
>> > > > +     mfspr   r3, SPRN_LPCR
>> > > > +     LOAD_REG_IMMEDIATE(r4, LPCR_UPRT)
>> > > > +     or      r3, r3, r4
>> > > > +     mtspr   SPRN_LPCR, r3
>> > > > +END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_RADIX)  
>> > 
>> > We are probably better off saving the value somewhere during boot
>> > and just "blasting" it whole back.  
>> 
>> We seem to touch LPCR in a bunch of places these days.  Not sure when "sometimes
>>  during boot" should actually be.
>
> In the short term, what if we just save LPCR and restore it after calling
> cpu_restore? As you say there are a lot of things that touch LPCR we're
> not catching here.

Yeah can we save it on the way down and restore that value on the way
back up?

The real problem here is that cpu_restore() does not "restore" anything,
it programs a set of fixed values.

We should probably rework it so that it actually does a save/restore to
avoid more bugs like this.

cheers

Thread

[PATCH 3/3] powernv:idle: Set LPCR_UPRT on wakeup from deep-stop "Gautham R. Shenoy" <ego@linux.vnet.ibm.com> - 2017-04-12 13:50 +0200
  Re: [PATCH 3/3] powernv:idle: Set LPCR_UPRT on wakeup from deep-stop "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> - 2017-04-13 06:10 +0200
    Re: [PATCH 3/3] powernv:idle: Set LPCR_UPRT on wakeup from deep-stop Benjamin Herrenschmidt <benh@kernel.crashing.org> - 2017-04-13 06:20 +0200
      Re: [PATCH 3/3] powernv:idle: Set LPCR_UPRT on wakeup from deep-stop Michael Neuling <mikey@neuling.org> - 2017-04-13 08:30 +0200
        Re: [PATCH 3/3] powernv:idle: Set LPCR_UPRT on wakeup from  deep-stop Nicholas Piggin <npiggin@gmail.com> - 2017-04-13 09:20 +0200
          Re: [PATCH 3/3] powernv:idle: Set LPCR_UPRT on wakeup from deep-stop Michael Ellerman <mpe@ellerman.id.au> - 2017-04-13 12:10 +0200
          Re: [PATCH 3/3] powernv:idle: Set LPCR_UPRT on wakeup from deep-stop Gautham R Shenoy <ego@linux.vnet.ibm.com> - 2017-04-13 14:00 +0200
            Re: [PATCH 3/3] powernv:idle: Set LPCR_UPRT on wakeup from  deep-stop Nicholas Piggin <npiggin@gmail.com> - 2017-04-13 14:10 +0200

csiph-web