Re: [RFC] omap3isp: add support for CSI1 bus

From	Pavel Machek <pavel@ucw.cz>
Newsgroups	linux.kernel
Subject	Re: [RFC] omap3isp: add support for CSI1 bus
Date	2017-04-11 20:20 +0200
Message-ID	<tv8yu-27K-9@gated-at.bofh.it> (permalink)
References	(5 earlier) <tgyld-2jr-33@gated-at.bofh.it> <tgyld-2jr-31@gated-at.bofh.it> <thhBD-15f-1@gated-at.bofh.it> <thVIJ-50B-5@gated-at.bofh.it> <tjt5E-4JP-27@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

[Multipart message — attachments visible in raw view] - view raw

On Fri 2017-03-10 14:41:31, Pavel Machek wrote:
> On Mon 2017-03-06 08:56:59, Pavel Machek wrote:
> > omap3isp: add rest of CSI1 support
> > 
> > CSI1 needs one more bit to be set up. Do just that.
> > 
> > Signed-off-by: Pavel Machek <pavel@ucw.cz>
> > 
> > ---
> > 
> > Hmm. Looking at that... num_data_lanes probably should be modified in
> > local variable, not globally like this. Should I do that?
> > 
> > Anything else that needs fixing?
> 
> Ping? Feedback here would be nice. This is last "interesting" piece of
> the hardware support...

Any news here? You complained that I was not pushy enough in the past
;-).

								Pavel
								
> > index 24a9fc5..6feba36 100644
> > --- a/drivers/media/platform/omap3isp/ispccp2.c
> > +++ b/drivers/media/platform/omap3isp/ispccp2.c
> > @@ -21,6 +23,7 @@
> >  #include <linux/mutex.h>
> >  #include <linux/uaccess.h>
> >  #include <linux/regulator/consumer.h>
> > +#include <linux/regmap.h>
> >  
> >  #include "isp.h"
> >  #include "ispreg.h"
> > @@ -1149,6 +1152,7 @@ int omap3isp_ccp2_init(struct isp_device *isp)
> >  				"Could not get regulator vdds_csib\n");
> >  			ccp2->vdds_csib = NULL;
> >  		}
> > +		ccp2->phy = &isp->isp_csiphy2;
> >  	} else if (isp->revision == ISP_REVISION_15_0) {
> >  		ccp2->phy = &isp->isp_csiphy1;
> >  	}
> > diff --git a/drivers/media/platform/omap3isp/ispcsiphy.c b/drivers/media/platform/omap3isp/ispcsiphy.c
> > index 50c0f64..cd6351b 100644
> > --- a/drivers/media/platform/omap3isp/ispcsiphy.c
> > +++ b/drivers/media/platform/omap3isp/ispcsiphy.c
> > @@ -197,9 +200,10 @@ static int omap3isp_csiphy_config(struct isp_csiphy *phy)
> >  	}
> >  
> >  	if (buscfg->interface == ISP_INTERFACE_CCP2B_PHY1
> > -	    || buscfg->interface == ISP_INTERFACE_CCP2B_PHY2)
> > +	    || buscfg->interface == ISP_INTERFACE_CCP2B_PHY2) {
> >  		lanes = &buscfg->bus.ccp2.lanecfg;
> > -	else
> > +		phy->num_data_lanes = 1;
> > +	} else
> >  		lanes = &buscfg->bus.csi2.lanecfg;
> >  
> >  	/* Clock and data lanes verification */
> > @@ -302,13 +306,16 @@ int omap3isp_csiphy_acquire(struct isp_csiphy *phy)
> >  	if (rval < 0)
> >  		goto done;
> >  
> > -	rval = csiphy_set_power(phy, ISPCSI2_PHY_CFG_PWR_CMD_ON);
> > -	if (rval) {
> > -		regulator_disable(phy->vdd);
> > -		goto done;
> > +	if (phy->isp->revision == ISP_REVISION_15_0) {
> > +		rval = csiphy_set_power(phy, ISPCSI2_PHY_CFG_PWR_CMD_ON);
> > +		if (rval) {
> > +			regulator_disable(phy->vdd);
> > +			goto done;
> > +		}
> > +		
> > +		csiphy_power_autoswitch_enable(phy, true);		
> >  	}
> >  
> > -	csiphy_power_autoswitch_enable(phy, true);
> >  	phy->phy_in_use = 1;
> >  
> >  done:
> > 
> 
> 
> 



-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

Re: [RFC] omap3isp: add support for CSI1 bus Pavel Machek <pavel@ucw.cz> - 2017-04-11 20:20 +0200

csiph-web