Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1617733

Re: [PATCH v3 2/8] acpi: apei: handle SEI notification type for ARMv8

Show all headers | View raw

Hi James,

Sorry for reply late, and thanks for your comments.

On 2017/4/1 0:20, James Morse wrote:
> Hi Xie XiuQi,
> 
> On 30/03/17 11:31, Xie XiuQi wrote:
>> ARM APEI extension proposal added SEI (asynchronous SError interrupt)
>> notification type for ARMv8.
>>
>> Add a new GHES error source handling function for SEI. In firmware
>> first mode, if an error source's notification type is SEI. Then GHES
>> could parse and report the detail error information.
> 
> The APEI additions are unsafe until patch 4 as SEA can interrupt SEI and
> deadlock while trying to take the same set of locks. This patch needs to be
> after that interaction is fixed/prevented, or we should prevent it by adding a
> depends-on-not to the Kconfig to prevent SEI and SEA being registered at the
> same time. (as a short term fix).

Will fix later.

> 
> (more comments on this on that later patch)
> 
> 
>> diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
>> index e52be6a..53710a2 100644
>> --- a/arch/arm64/kernel/traps.c
>> +++ b/arch/arm64/kernel/traps.c
> 
>> @@ -625,6 +627,14 @@ asmlinkage void bad_mode(struct pt_regs *regs, int reason, unsigned int esr)
> 
> bad_mode() is called in other scenarios too, for example executing an undefined
> instruction at EL1. You split the SError path out of the vectors in patch 7, I
> think we should do that here.
> 
> 
>>  		handler[reason], smp_processor_id(), esr,
>>  		esr_get_class_string(esr));
>>  
>> +	/*
>> +	 * In firmware first mode, we could assume firmware will only generate one
>> +	 * of cper records at a time. There is no risk for one cpu to parse ghes table.
>> +	 */
> 
> I don't follow this comment, is this saying SError can't interrupt SError? We
> already get this guarantee as the CPU masks SError when it takes an exception.
> 
> Firmware can generate multiple CPER records for a single 'event'. The CPER
> records are the 'Data' in ACPI:Table 18-343 Generic Error Data Entry, and there
> are 'zero or more' of these with a 'Generic Error Status Block' header that
> describes the overall event. (Table 18-342).
> 
> I don't think we need this comment.

Thanks for your explanation, OK, I'll remove this comment.

> 
> 
>> +	if (IS_ENABLED(CONFIG_ACPI_APEI_SEI) && ESR_ELx_EC(esr) == ESR_ELx_EC_SERROR) {
>> +		ghes_notify_sei();
>> +	}
> 
>>  	die("Oops - bad mode", regs, 0);
>>  	local_irq_disable();
>>  	panic("bad mode");
> 
> Thanks,
> 
> James
> 
> 
> .
> 

-- 
Thanks,
Xie XiuQi

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH v3 2/8] acpi: apei: handle SEI notification type for ARMv8 Xie XiuQi <xiexiuqi@huawei.com> - 2017-03-30 12:50 +0200
  Re: [PATCH v3 2/8] acpi: apei: handle SEI notification type for ARMv8 James Morse <james.morse@arm.com> - 2017-03-31 18:30 +0200
    Re: [PATCH v3 2/8] acpi: apei: handle SEI notification type for ARMv8 Xie XiuQi <xiexiuqi@huawei.com> - 2017-04-06 11:20 +0200

csiph-web