Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1616753

Re: [PATCH v6 1/4] dt-bindings: phy: Add support for QUSB2 phy

Show all headers | View raw

On 04/04/2017 11:58 PM, Stephen Boyd wrote:
> On 03/20, Vivek Gautam wrote:
>> diff --git a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
>> new file mode 100644
>> index 000000000000..a6d19acde9e0
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
>> @@ -0,0 +1,45 @@
>> +Qualcomm QUSB2 phy controller
>> +=============================
>> +
>> +QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets.
>> +
>> +Required properties:
>> + - compatible: compatible list, contains "qcom,msm8996-qusb2-phy".
>> + - reg: offset and length of the PHY register set.
>> + - #phy-cells: must be 0.
>> +
>> + - clocks: a list of phandles and clock-specifier pairs,
>> +	   one for each entry in clock-names.
>> + - clock-names: must be "cfg_ahb" for phy config clock,
>> +			"ref" for 19.2 MHz ref clk,
>> +			"iface" for phy interface clock (Optional).
>> +
>> + - vdd-phy-supply: Phandle to a regulator supply to PHY core block.
>> + - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block.
>> + - vdda-phy-dpdm-supply: Phandle to 3.1V regulator supply to Dp/Dm port signals.
>> +
>> + - resets: Phandle to reset to phy block.
>> +
>> +Optional properties:
>> + - nvmem-cells: Phandle to nvmem cell that contains 'HS Tx trim'
>> +		tuning parameter value for qusb2 phy.
>> +
>> + - qcom,tcsr-syscon: Phandle to TCSR syscon register region.
>> +
>> +Example:
>> +	hsusb_phy: phy@7411000 {
>> +		compatible = "qcom,msm8996-qusb2-phy";
>> +		reg = <0x7411000 0x180>;
>> +		#phy-cells = <0>;
>> +
>> +		clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
>> +			<&gcc GCC_RX1_USB2_CLKREF_CLK>,
>> +		clock-names = "cfg_ahb", "ref";
>> +
>> +		vdd-phy-supply = <&pm8994_s2>;
> pm8994_s2 is a "corner" regulator. I'm not sure how we're going
> to have it listed here as something like a regulator supply in
> the binding. We probably should leave it out for now and let the
> power domain + pm_qos stuff for corners work out. From what I see
> in the downstream driver the code is setting the corner to '4'
> when active, and '1' when inactive.

Sure, let's allow power domain and corner voltage work handle
this. I will drop this regulator entry from bindings, and the driver.


Best regards
Vivek

-- 
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

Re: [PATCH v6 1/4] dt-bindings: phy: Add support for QUSB2 phy Stephen Boyd <sboyd@codeaurora.org> - 2017-04-04 20:30 +0200
  Re: [PATCH v6 1/4] dt-bindings: phy: Add support for QUSB2 phy Vivek Gautam <vivek.gautam@codeaurora.org> - 2017-04-05 11:20 +0200

csiph-web