Re: [PATCH v4 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers

From	Paul Cercueil <paul@crapouillou.net>
Newsgroups	linux.kernel
Subject	Re: [PATCH v4 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers
Date	2017-04-03 12:30 +0200
Message-ID	<ts7pg-5zy-33@gated-at.bofh.it> (permalink)
References	<t3AXv-5pP-5@gated-at.bofh.it> <trUBH-5rN-5@gated-at.bofh.it> <trUBI-5rN-11@gated-at.bofh.it> <ts6We-5aL-15@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

Hi,

Le 2017-04-03 11:57, Sergei Shtylyov a écrit :
> Hello!
> 
> On 4/2/2017 11:42 PM, Paul Cercueil wrote:
> 
>> For a description of the pinctrl devicetree node, please read
>> Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt
>> 
>> For a description of the gpio devicetree nodes, please read
>> Documentation/devicetree/bindings/gpio/ingenic,gpio.txt
>> 
>> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> [...]
> 
>> diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi 
>> b/arch/mips/boot/dts/ingenic/jz4740.dtsi
>> index 3e1587f1f77a..9c23c877fc34 100644
>> --- a/arch/mips/boot/dts/ingenic/jz4740.dtsi
>> +++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi
>> @@ -55,6 +55,67 @@
>>  		clock-names = "rtc";
>>  	};
>> 
>> +	pinctrl: ingenic-pinctrl@10010000 {
> 
>    The node name should be generic, so please rename it to something
> like "pin-controller@..."

OK.

>> +		compatible = "ingenic,jz4740-pinctrl";
>> +		reg = <0x10010000 0x400>;
>> +
>> +		gpa: gpio-controller@0 {
> 
>    The name should be just "gpio@0", according to ePAPR and its
> successor spec. Although, using the <unit-address> without the "reg"
> prop isn't allowed either...

ePAPR says: "If the node has no reg property, the unit-address may be
omitted if the node name alone differentiates the node from other nodes 
at
the same level in the tree."

I could use 'gpio@bank-a', it is allowed by the spec. Or do you prefer 
'gpio@0'?

> MBR, Sergei

I'll wait from some feedback on the other patches then send a v5.

Thanks,
-Paul

Thread

[PATCH v4 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers Paul Cercueil <paul@crapouillou.net> - 2017-04-02 22:50 +0200
  Re: [PATCH v4 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl  and gpio drivers Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> - 2017-04-03 12:00 +0200
    Re: [PATCH v4 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl  and gpio drivers Paul Cercueil <paul@crapouillou.net> - 2017-04-03 12:30 +0200
      Re: [PATCH v4 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl  and gpio drivers Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> - 2017-04-03 12:40 +0200
  Re: [PATCH v4 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl  and gpio drivers Linus Walleij <linus.walleij@linaro.org> - 2017-04-07 11:50 +0200
    Re: [PATCH v4 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl  and gpio drivers Paul Cercueil <paul@crapouillou.net> - 2017-04-07 16:10 +0200

csiph-web