Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1611781
| From | Mark Rutland <mark.rutland@arm.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH v2 7/8] bus: brcmstb_gisb: add notifier handling |
| Date | 2017-03-29 12:20 +0200 |
| Message-ID | <tqiRQ-5sN-11@gated-at.bofh.it> (permalink) |
| References | <tq70m-5jM-3@gated-at.bofh.it> <tq70n-5jM-31@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
Hi Doug,
On Tue, Mar 28, 2017 at 02:34:30PM -0700, Doug Berger wrote:
> Check for GISB arbitration errors through a chained notifier
> when a process dies or a kernel panic occurs. This allows a
> meaningful diagnostic message to occur along with other
> diagnostic information.
>
> Notably writes to a bad GISB address on an ARM64 architecture
> kernel cause unrecoverable SError aborts and this allows the
> cause of the abort to be seen.
>
> Signed-off-by: Doug Berger <opendmb@gmail.com>
Thanks for changing this.
> ---
> drivers/bus/brcmstb_gisb.c | 27 +++++++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
>
> diff --git a/drivers/bus/brcmstb_gisb.c b/drivers/bus/brcmstb_gisb.c
> index 500b6bb5c739..774729002b8c 100644
> --- a/drivers/bus/brcmstb_gisb.c
> +++ b/drivers/bus/brcmstb_gisb.c
> @@ -24,6 +24,8 @@
> #include <linux/of.h>
> #include <linux/bitops.h>
> #include <linux/pm.h>
> +#include <linux/kernel.h>
> +#include <linux/kdebug.h>
>
> #ifdef CONFIG_ARM
> #include <asm/bug.h>
> @@ -290,6 +292,25 @@ static irqreturn_t brcmstb_gisb_tea_handler(int irq, void *dev_id)
> return IRQ_HANDLED;
> }
>
> +/*
> + * Dump out gisb errors on die or panic.
> + */
> +static int dump_gisb_error(struct notifier_block *self, unsigned long v,
> + void *p)
> +{
> + struct brcmstb_gisb_arb_device *gdev;
> +
> + /* iterate over each GISB arb registered handlers */
> + list_for_each_entry(gdev, &brcmstb_gisb_arb_device_list, next)
> + brcmstb_gisb_arb_decode_addr(gdev, "async abort");
> +
> + return 0;
I think this should be NOTIFY_OK.
> +}
> +
> +static struct notifier_block gisb_error_notifier = {
> + .notifier_call = dump_gisb_error,
> +};
> +
> static DEVICE_ATTR(gisb_arb_timeout, S_IWUSR | S_IRUGO,
> gisb_arb_get_timeout, gisb_arb_set_timeout);
>
> @@ -408,6 +429,12 @@ static int __init brcmstb_gisb_arb_probe(struct platform_device *pdev)
> board_be_handler = brcmstb_bus_error_handler;
> #endif
>
> + if (list_is_singular(&brcmstb_gisb_arb_device_list)) {
> + register_die_notifier(&gisb_error_notifier);
> + atomic_notifier_chain_register(&panic_notifier_list,
> + &gisb_error_notifier);
I don't think this is quite right. A notifier_block can only be
registered to one notifier chain at a time, and this has the potential
to corrupt both chains.
I also think you only need to register the panic notifier. An SError
should always result in a panic.
Thanks,
Mark.
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH v2 0/8] bus: brcmstb_gisb: add support for GISBv7 arbiter Doug Berger <opendmb@gmail.com> - 2017-03-28 23:40 +0200
[PATCH v2 5/8] bus: brcmstb_gisb: correct support for 64-bit address output Doug Berger <opendmb@gmail.com> - 2017-03-28 23:40 +0200
[PATCH v2 2/8] arm64: mm: mark fault_info __ro_after_init Doug Berger <opendmb@gmail.com> - 2017-03-28 23:40 +0200
Re: [PATCH v2 2/8] arm64: mm: mark fault_info __ro_after_init Mark Rutland <mark.rutland@arm.com> - 2017-03-29 13:30 +0200
[PATCH v2 4/8] bus: brcmstb_gisb: Correct hooking of ARM aborts Doug Berger <opendmb@gmail.com> - 2017-03-28 23:40 +0200
[PATCH v2 7/8] bus: brcmstb_gisb: add notifier handling Doug Berger <opendmb@gmail.com> - 2017-03-28 23:40 +0200
Re: [PATCH v2 7/8] bus: brcmstb_gisb: add notifier handling Mark Rutland <mark.rutland@arm.com> - 2017-03-29 12:20 +0200
Re: [PATCH v2 7/8] bus: brcmstb_gisb: add notifier handling Doug Berger <opendmb@gmail.com> - 2017-03-29 19:40 +0200
Re: [PATCH v2 7/8] bus: brcmstb_gisb: add notifier handling Mark Rutland <mark.rutland@arm.com> - 2017-03-29 20:20 +0200
[PATCH v2 1/8] arm64: mm: Allow installation of memory abort handlers Doug Berger <opendmb@gmail.com> - 2017-03-28 23:40 +0200
Re: [PATCH v2 1/8] arm64: mm: Allow installation of memory abort handlers Mark Rutland <mark.rutland@arm.com> - 2017-03-29 13:40 +0200
[PATCH v2 3/8] bus: brcmstb_gisb: Use register offsets with writes too Doug Berger <opendmb@gmail.com> - 2017-03-28 23:40 +0200
csiph-web