Re: [PATCH v3 0/6] bus: brcmstb_gisb: add support for GISBv7 arbiter

From	Florian Fainelli <f.fainelli@gmail.com>
Newsgroups	linux.kernel
Subject	Re: [PATCH v3 0/6] bus: brcmstb_gisb: add support for GISBv7 arbiter
Date	2017-03-30 18:40 +0200
Message-ID	<tqLh7-GX-1@gated-at.bofh.it> (permalink)
References	<tqwi5-6vs-3@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

On 03/29/2017 05:29 PM, Doug Berger wrote:
> This patch set contains changes to enable the GISB arbiter driver
> on the latest ARM64 architecture Set-Top Box chips from Broadcom.
> 
> Since the ARM64 architecture does not support the hooking of low
> level fault handlers the driver has been adjusted to depend solely
> on GISB interrupts and notify events to provide diagnostic
> messaging.  The GISB hardware still triggers bus faults for the
> processor so the default low-level aborts will occur and will be
> handled based on the architecture specific kernel implementation.
> 
> While this tends to obsure the GISB error messaging it is still
> reasonable so the same approach is applied to the ARM architecture
> for consistency.
> 
> The patches also correct some issues with the existing driver
> and add the new register map for the GISBv7 hardware first
> appearing in the BCM7278 device.

This all looks great to me, and since there are no more ARM64
dependencies I can take this via the Broadcom ARM/ARM64 SoC pull requests.

Mark, are you also happy with this v3?

Thanks Doug!

> 
> Changes since v2 at [2]:
>  - Removed code associated with enabling the hooking of ARM64
>    memory faults as well as the code that hooks them for both
>    ARM and ARM64 architectures within the GISB arbiter driver.
>  - Created separate notifiers for die and panic events to
>    prevent list corruption, and substituted the notifier return
>    name for the previous magic number (Thanks Mark!)
> 
> Changes since v1 at [1]:
>  - Removed code associated with hooking SError handling in favor
>    of a registered notifier (Thanks Mark!)
>  - Removed an unnecessary explicit cast (Thanks Gregory!)
> 
> [1] https://lkml.org/lkml/2017/3/24/413
> [2] https://lkml.org/lkml/2017/3/28/1125
> 
> Doug Berger (6):
>   bus: brcmstb_gisb: Use register offsets with writes too
>   bus: brcmstb_gisb: correct support for 64-bit address output
>   bus: brcmstb_gisb: add notifier handling
>   bus: brcmstb_gisb: remove low-level ARM hooks
>   bus: brcmstb_gisb: enable driver for ARM64 architecture
>   bus: brcmstb_gisb: update to support new revision
> 
>  .../devicetree/bindings/bus/brcm,gisb-arb.txt      |   3 +-
>  drivers/bus/Kconfig                                |   2 +-
>  drivers/bus/brcmstb_gisb.c                         | 121 ++++++++++++---------
>  3 files changed, 75 insertions(+), 51 deletions(-)
> 


-- 
Florian

Thread

[PATCH v3 0/6] bus: brcmstb_gisb: add support for GISBv7 arbiter Doug Berger <opendmb@gmail.com> - 2017-03-30 02:40 +0200
  [PATCH v3 6/6] bus: brcmstb_gisb: update to support new revision Doug Berger <opendmb@gmail.com> - 2017-03-30 02:40 +0200
  [PATCH v3 5/6] bus: brcmstb_gisb: enable driver for ARM64 architecture Doug Berger <opendmb@gmail.com> - 2017-03-30 02:40 +0200
  Re: [PATCH v3 0/6] bus: brcmstb_gisb: add support for GISBv7 arbiter Florian Fainelli <f.fainelli@gmail.com> - 2017-03-30 18:40 +0200
    Re: [PATCH v3 0/6] bus: brcmstb_gisb: add support for GISBv7 arbiter Mark Rutland <mark.rutland@arm.com> - 2017-03-30 20:30 +0200
      Re: [PATCH v3 0/6] bus: brcmstb_gisb: add support for GISBv7 arbiter Florian Fainelli <f.fainelli@gmail.com> - 2017-03-30 21:40 +0200

csiph-web