Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1607960
| From | Florian Fainelli <f.fainelli@gmail.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH] net: phy: handle state correctly in phy_stop_machine |
| Date | 2017-03-23 22:50 +0100 |
| Message-ID | <toiMi-8kl-11@gated-at.bofh.it> (permalink) |
| References | <tnVcZ-8hP-21@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On 03/22/2017 01:27 PM, Zach Brown wrote:
> From: Nathan Sullivan <nathan.sullivan@ni.com>
>
> If the PHY is halted on stop, then do not set the state to PHY_UP. This
> ensures the phy will be restarted later in phy_start when the machine is
> started again.
So essentially what you want to "defeat" here is entering phy_start()
with PHY_UP therefore not run this part:
case PHY_HALTED:
/* make sure interrupts are re-enabled for the PHY */
if (phydev->irq != PHY_POLL) {
err = phy_enable_interrupts(phydev);
if (err < 0)
break;
}
phydev->state = PHY_RESUMING;
do_resume = true;
break;
which is what re-enables interrupts and makes sure the PHY is resumed,
right?
If that's the scenario, I guess:
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
>
> Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
> Signed-off-by: Brad Mouring <brad.mouring@ni.com>
> Acked-by: Xander Huff <xander.huff@ni.com>
> Acked-by: Kyle Roeschley <kyle.roeschley@ni.com>
> ---
> drivers/net/phy/phy.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
> index 7cc1b7d..fe2d4c4 100644
> --- a/drivers/net/phy/phy.c
> +++ b/drivers/net/phy/phy.c
> @@ -678,7 +678,7 @@ void phy_stop_machine(struct phy_device *phydev)
> cancel_delayed_work_sync(&phydev->state_queue);
>
> mutex_lock(&phydev->lock);
> - if (phydev->state > PHY_UP)
> + if (phydev->state > PHY_UP && phydev->state != PHY_HALTED)
> phydev->state = PHY_UP;
> mutex_unlock(&phydev->lock);
> }
>
--
Florian
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH] net: phy: handle state correctly in phy_stop_machine Zach Brown <zach.brown@ni.com> - 2017-03-22 21:40 +0100 Re: [PATCH] net: phy: handle state correctly in phy_stop_machine David Miller <davem@davemloft.net> - 2017-03-23 22:30 +0100 Re: [PATCH] net: phy: handle state correctly in phy_stop_machine Florian Fainelli <f.fainelli@gmail.com> - 2017-03-23 22:50 +0100 Re: [PATCH] net: phy: handle state correctly in phy_stop_machine Florian Fainelli <f.fainelli@gmail.com> - 2017-03-23 22:50 +0100 Re: [PATCH] net: phy: handle state correctly in phy_stop_machine David Miller <davem@davemloft.net> - 2017-03-24 20:30 +0100
csiph-web