Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1605577

Re: [PATCH v2 2/2] ASoC: codec: wm8960: Relax bit clock computation

From Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Newsgroups linux.kernel
Subject Re: [PATCH v2 2/2] ASoC: codec: wm8960: Relax bit clock computation
Date 2017-03-21 14:00 +0100
Message-ID <tnryi-3s7-11@gated-at.bofh.it> (permalink)
References <tnryi-3s7-5@gated-at.bofh.it> <tnryi-3s7-13@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


On Tue, Mar 21, 2017 at 12:09:36PM +0200, Daniel Baluta wrote:
> WM8960 derives bit clock from sysclock using BCLKDIV[3:0] of R8
> clocking register (See WM8960 datasheet, page 71).
> 
> There are use cases, like this:
> aplay -Dhw:0,0 -r 48000 -c 1 -f S20_3LE -t raw audio48k20b_3LE1c.pcm
> 
> where no BCLKDIV applied to sysclock can give us the exact requested
> bitclk, so driver fails to configure clocking and aplay fails to run.
> 
> Fix this by relaxing bitclk computation, so that when no exact value
> can be derived from sysclk pick the closest value greater than
> expected bitclk.
> 
> Suggested-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
> ---
> Changes since v1:
> 	* use a marker to check if a match is found
> 	* didn't removed PLL as Charles suggested because there is
> 	a special PLL mode which explictly uses PLL. We could start
> 	a discussion on not using PLL when deriving bitclk, but this
> 	is to be done in another patch.
> 

Could you elaborate on this a little more am I not sure I follow
100%? There is a mode which explictly requires the PLL to be used
(WM8960_SYSCLK_PLL) but in that case your wm8960_configure_sysclk
code will not be called so I don't see what is causing that to have
an effect on this patch?

Thanks,
Charles

Back to linux.kernel | Previous | NextNext in thread | Find similar | Unroll thread


Thread

Re: [PATCH v2 2/2] ASoC: codec: wm8960: Relax bit clock computation Charles Keepax <ckeepax@opensource.wolfsonmicro.com> - 2017-03-21 14:00 +0100
  Re: [alsa-devel] [PATCH v2 2/2] ASoC: codec: wm8960: Relax bit clock computation Daniel Baluta <daniel.baluta@gmail.com> - 2017-03-21 15:20 +0100
    Re: [alsa-devel] [PATCH v2 2/2] ASoC: codec: wm8960: Relax bit clock  computation Charles Keepax <ckeepax@opensource.wolfsonmicro.com> - 2017-03-21 15:30 +0100
      Re: [alsa-devel] [PATCH v2 2/2] ASoC: codec: wm8960: Relax bit clock computation Daniel Baluta <daniel.baluta@gmail.com> - 2017-03-21 15:30 +0100
        Re: [alsa-devel] [PATCH v2 2/2] ASoC: codec: wm8960: Relax bit clock  computation Charles Keepax <ckeepax@opensource.wolfsonmicro.com> - 2017-03-21 15:40 +0100

csiph-web