Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1604301

Re: [PATCH] irqchip: gic-v3-its: Don't assume GICv3 hardware supports 16bit INTID

Show all headers | View raw

Hi Marc,


On 03/17/2017 10:49 AM, Marc Zyngier wrote:
> On 15/03/17 05:46, Shanker Donthineni wrote:
>> The current ITS driver is assuming every ITS hardware implementation
>> supports minimum of 16bit INTID. But this is not true, as per GICv3
>> specification, INTID field is IMPLEMENTATION DEFINED in the range of
>> 14-24 bits. We might see an unpredictable system behavior on systems
>> where hardware support less than 16bits and software tries to use
>> 64K LPI interrupts.
>>
>> On Qualcomm Datacenter Technologies QDF2400 platform, boot log shows
>> confusing information about number of LPI chunks as shown below. The
>> QDF2400 ITS hardware supports 24bit INTID.
>>
>> This patch allocates the memory resources for PEND/PROP tables based
>> on discoverable value which is specified in GITS_TYPER.IDbits. Also
>> taking this opportunity to increase number of LPI/MSI(x) to 128K if
>> the hardware is capable, and show log message that reflects the
>> correct number of LPI chunks.
> As much as I like the idea of fixing the obvious bug that assuming 16bit
> of ID space is, what is the rational of capping the support to another
> arbitrary value?

I believe 128K LPIs are sufficient so capped to 17 bits.

> Why can't we (just like other tables) try and allocate the full amount
> required (with a possible back-off if allocations fail)?

Qualcomm ITS hardware supports 24bit LPI, it requires lot of memory to handle  2^24  entry property and pending table.

>
> Thanks,
>
> 	M.

-- 
Shanker Donthineni
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH] irqchip: gic-v3-its: Don't assume GICv3 hardware supports 16bit INTID Shanker Donthineni <shankerd@codeaurora.org> - 2017-03-15 06:50 +0100
  Re: [PATCH] irqchip: gic-v3-its: Don't assume GICv3 hardware supports  16bit INTID Marc Zyngier <marc.zyngier@arm.com> - 2017-03-17 17:00 +0100
    Re: [PATCH] irqchip: gic-v3-its: Don't assume GICv3 hardware supports  16bit INTID Shanker Donthineni <shankerd@codeaurora.org> - 2017-03-20 11:00 +0100

csiph-web