Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1599731

Re: [Outreachy kernel] [PATCH v3] staging: adis16060_core: Use private driver lock instead of mlock

From Alison Schofield <amsfield22@gmail.com>
Newsgroups linux.kernel
Subject Re: [Outreachy kernel] [PATCH v3] staging: adis16060_core: Use private driver lock instead of mlock
Date 2017-03-13 20:40 +0100
Message-ID <tkDZ0-5cJ-7@gated-at.bofh.it> (permalink)
References <tkCzT-4kS-3@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


On Mon, Mar 13, 2017 at 11:41:30PM +0530, simran singhal wrote:
> The IIO subsystem is redefining iio_dev->mlock to be used by
> the IIO core only for protecting device operating mode changes.
> ie. Changes between INDIO_DIRECT_MODE, INDIO_BUFFER_* modes.
> 
> In this driver, mlock was being used to protect hardware state
> changes.  Replace it with a lock in the devices global data.
> 
> Signed-off-by: simran singhal <singhalsimran0@gmail.com>
> ---
>  
>  v3:
>    -Removed new lock to reuse the existing lock

Hi Simran,

Check Lars review comments about refactoring into a
write_then_read function protected by same buf_lock.

As it is now, it'll deadlock on buf_lock. It locks in
_read_raw and then calls _spi_write where an attempt
is made to grab the same lock.

alisons


> 
>  drivers/staging/iio/gyro/adis16060_core.c | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/staging/iio/gyro/adis16060_core.c b/drivers/staging/iio/gyro/adis16060_core.c
> index c9d46e7..602ec53 100644
> --- a/drivers/staging/iio/gyro/adis16060_core.c
> +++ b/drivers/staging/iio/gyro/adis16060_core.c
> @@ -83,11 +83,12 @@ static int adis16060_read_raw(struct iio_dev *indio_dev,
>  {
>  	u16 tval = 0;
>  	int ret;
> +	struct adis16060_state *st = iio_priv(indio_dev);
>  
>  	switch (mask) {
>  	case IIO_CHAN_INFO_RAW:
>  		/* Take the iio_dev status lock */
> -		mutex_lock(&indio_dev->mlock);
> +		mutex_lock(&st->buf_lock);
>  		ret = adis16060_spi_write(indio_dev, chan->address);
>  		if (ret < 0)
>  			goto out_unlock;
> @@ -96,7 +97,7 @@ static int adis16060_read_raw(struct iio_dev *indio_dev,
>  		if (ret < 0)
>  			goto out_unlock;
>  
> -		mutex_unlock(&indio_dev->mlock);
> +		mutex_unlock(&st->buf_lock);
>  		*val = tval;
>  		return IIO_VAL_INT;
>  	case IIO_CHAN_INFO_OFFSET:
> @@ -112,7 +113,7 @@ static int adis16060_read_raw(struct iio_dev *indio_dev,
>  	return -EINVAL;
>  
>  out_unlock:
> -	mutex_unlock(&indio_dev->mlock);
> +	mutex_unlock(&st->buf_lock);
>  	return ret;
>  }
>  
> -- 
> 2.7.4
> 
> -- 
> You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to outreachy-kernel+unsubscribe@googlegroups.com.
> To post to this group, send email to outreachy-kernel@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/20170313181130.GA27111%40singhal-Inspiron-5558.
> For more options, visit https://groups.google.com/d/optout.

Back to linux.kernel | Previous | NextPrevious in thread | Find similar | Unroll thread


Thread

[PATCH v3] staging: adis16060_core: Use private driver lock instead  of mlock simran singhal <singhalsimran0@gmail.com> - 2017-03-13 19:10 +0100
  Re: [Outreachy kernel] [PATCH v3] staging: adis16060_core: Use  private driver lock instead of mlock Alison Schofield <amsfield22@gmail.com> - 2017-03-13 20:40 +0100

csiph-web