Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1594794

[PATCH v11 1/3] dt-bindings: Add support for samsung s6e3ha2 panel binding

From Hoegeun Kwon <hoegeun.kwon@samsung.com>
Newsgroups linux.kernel
Subject [PATCH v11 1/3] dt-bindings: Add support for samsung s6e3ha2 panel binding
Date 2017-03-08 02:50 +0100
Message-ID <tiyTL-7N1-5@gated-at.bofh.it> (permalink)
References <tiyTL-7N1-1@gated-at.bofh.it> <tiyTL-7N1-7@gated-at.bofh.it> <tiyTL-7N1-1@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


The Samsung s6e3ha2 is a 5.7" 1440x2560 AMOLED panel connected
using MIPI-DSI interfaces.

Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../bindings/display/panel/samsung,s6e3ha2.txt     | 28 ++++++++++++++++++++++
 1 file changed, 28 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt

diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
new file mode 100644
index 0000000..18854f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
@@ -0,0 +1,28 @@
+Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel
+
+Required properties:
+  - compatible: "samsung,s6e3ha2"
+  - reg: the virtual channel number of a DSI peripheral
+  - vdd3-supply: I/O voltage supply
+  - vci-supply: voltage supply for analog circuits
+  - reset-gpios: a GPIO spec for the reset pin (active low)
+  - enable-gpios: a GPIO spec for the panel enable pin (active high)
+
+Optional properties:
+  - te-gpios: a GPIO spec for the tearing effect synchronization signal
+    gpio pin (active high)
+
+Example:
+&dsi {
+	...
+
+	panel@0 {
+		compatible = "samsung,s6e3ha2";
+		reg = <0>;
+		vdd3-supply = <&ldo27_reg>;
+		vci-supply = <&ldo28_reg>;
+		reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+		te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
+	};
+};
-- 
1.9.1

Back to linux.kernel | Previous | NextPrevious in thread | Next in thread | Find similar | Unroll thread


Thread

[PATCH v11 0/3] Add support for the S6E3HA2 panel on TM2 board Hoegeun Kwon <hoegeun.kwon@samsung.com> - 2017-03-08 02:50 +0100
  [PATCH v11 1/3] dt-bindings: Add support for samsung s6e3ha2 panel  binding Hoegeun Kwon <hoegeun.kwon@samsung.com> - 2017-03-08 02:50 +0100
  [PATCH v11 3/3] arm64: dts: exynos: Add support for S6E3HA2 panel  device on TM2 board Hoegeun Kwon <hoegeun.kwon@samsung.com> - 2017-03-08 02:50 +0100
    Re: [PATCH v11 3/3] arm64: dts: exynos: Add support for S6E3HA2  panel device on TM2 board Krzysztof Kozlowski <krzk@kernel.org> - 2017-03-08 07:50 +0100
  [PATCH v11 2/3] drm/panel: Add support for S6E3HA2 panel driver on TM2  board Hoegeun Kwon <hoegeun.kwon@samsung.com> - 2017-03-08 02:50 +0100

csiph-web