Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1593185

Re: [PATCH v7 6/6] arm64: dts: sunxi: add support for the Orange Pi PC 2 board

Show all headers | View raw

[Multipart message — attachments visible in raw view] - view raw

On Mon, Mar 06, 2017 at 07:31:38AM +0800, Icenowy Zheng wrote:
> From: Andre Przywara <andre.przywara@arm.com>
> 
> The Orange Pi PC 2 is a typical single board computer using the
> Allwinner H5 SoC. Apart from the usual suspects it features three
> separately driven USB ports and a Gigabit Ethernet port.
> Also it has a SPI NOR flash soldered, from which the board can boot
> from. This enables the SBC to behave like a "real computer" with
> built-in firmware.
> 
> Add the board specific .dts file, which includes the H5 .dtsi and
> enables the peripherals that we support so far.
> 
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> [Icenowy: dropped all GPIO pinctrl nodes, change red LED gpio,
>  change MMC cd to active-low, rename some node names to prevent
>  underscores]
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>

And here your prefix should be "arm64: allwinner: h5:"

(This also applies to your previous patch).

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

Re: [PATCH v7 6/6] arm64: dts: sunxi: add support for the Orange Pi  PC 2 board Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-03-06 11:50 +0100

csiph-web