[PATCH 1/2] dt-bindings: Add INNOLUX P079ZCA panel bindings

From	Chris Zhong <zyw@rock-chips.com>
Newsgroups	linux.kernel
Subject	[PATCH 1/2] dt-bindings: Add INNOLUX P079ZCA panel bindings
Date	2017-03-03 02:40 +0100
Message-ID	<tgKml-2cx-1@gated-at.bofh.it> (permalink)
Organization	linux.* mail to news gateway

Show all headers | View raw

The Innolux P079ZCA is a 7.85" panel with a 768X1024 resolution and
connected to DSI using four lanes.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---

 .../bindings/display/panel/innolux,p079zca.txt     | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt

diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
new file mode 100644
index 0000000..c40c8e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
@@ -0,0 +1,22 @@
+Innolux P079ZCA 7.85" 768x1024 TFT LCD panel
+
+Required properties:
+- compatible: should be "innolux,p079zca"
+- power-supply: phandle of the regulator that provides the supply voltage
+- enable-gpios: panel enable gpio
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+
+	&mipi_dsi {
+		panel {
+			compatible = "innolux,p079zca";
+			reg = <0>;
+			power-supply = <...>;
+			backlight = <&backlight>;
+			enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+			status = "okay";
+		};
+	};
-- 
2.6.3

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

[PATCH 1/2] dt-bindings: Add INNOLUX P079ZCA panel bindings Chris Zhong <zyw@rock-chips.com> - 2017-03-03 02:40 +0100
  [PATCH 2/2] drm/panel: add innolux,p079zca panel driver Chris Zhong <zyw@rock-chips.com> - 2017-03-03 03:10 +0100

csiph-web