Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1588049

Re: [PATCH v1] regulator: Add driver for voltage controlled regulators

Show all headers | View raw

Rob, thanks for your comments!

El Tue, Feb 21, 2017 at 06:22:14PM -0600 Rob Herring ha dit:

> On Fri, Feb 10, 2017 at 12:43:48PM -0800, Matthias Kaehlcke wrote:
> > The output voltage of a voltage controlled regulator can be controlled
> > through the voltage of another regulator. The current version of this
> > driver assumes that the output voltage is a linear function of the control
> > voltage.
> >
> > ...
> > 
> >  .../devicetree/bindings/regulator/vctrl.txt        |  56 +++
> 
> Please split bindings to separate patch.

The driver is not functional without the bindings, is a separate patch
preferred nevertheless? I saw other recentish regulator drivers
(ltc3676, pv88080) added the driver and the bindings together.

> > +Optional properties:
> > +--------------------
> > ...
> > +- min-slew-down-rate	: Describes how slowly the regulator voltage will decay
> > +			  down in the worst case (lightest expected load).
> > +			  Specified in uV / us (like main regulator ramp rate).
> > +			  This value is required when ovp-threshold-percent is
> > +			  specified.
> 
> Don't we have a standard prop for this or that's just for ramp?

regulator-ramp-delay is related, but not exactly the same. The
ramp-delay is applied at the end of an up- or downward transition,
while this prop only specifies the downward rate and is applied in
between partial transitions towards the final voltage.

We possibly could use ramp-delay and add a set_voltage_time() op to
vctrl to prevent the core code from adding the "normal" ramp-delay at
the end of the transition. However it could be confusing that vctrl
handles the ramp-delay differently than other drivers, especially we
don't want a delay in the upward transition for vctrl. But maybe
nobody would care about the different behavior, as long as the
regulator does its job ...

> Perhaps this should be common?

I agree this could be a property other regulators might have. I think
it could be common as long as it is a descriptive property which
regulator drivers can use or not, without adding functionality to the
core code (except for DT parsing).

Mark, what do you think?

> > +
> > +Example:
> > +
> > +	vctrl_reg {
> 
> Don't use '_' in node names.

Will fix in next revision.

> > +		compatible = "vctrl-regulator";
> > +		regulator-name = "vctrl_reg";
> > +
> > +		ctrl-supply = <&ctrl_supply>;
> > +
> 
> > +		regulator-min-microvolt = <800000>;
> > +		regulator-max-microvolt = <1500000>;
> > +
> > +		output-voltage-range = <800000 1500000>;
> 
> Why do you need both?

We don't necessarily need both. The constraints are not available yet
when the driver parses and validates the DT node, but we can read
regulator-min/max-microvolt manually in the driver instead of
duplicating the values.

> > +		ctrl-voltage-range = <200000 500000>;
> > +
> > +		slew-rate = <225>;
> 
> Not documented.

Should be min-slew-down-rate. Will fix in next revision.

Thanks

Matthias

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

Re: [PATCH v1] regulator: Add driver for voltage controlled  regulators Rob Herring <robh@kernel.org> - 2017-02-22 01:30 +0100
  Re: [PATCH v1] regulator: Add driver for voltage controlled  regulators Matthias Kaehlcke <mka@chromium.org> - 2017-02-25 04:20 +0100
    Re: [PATCH v1] regulator: Add driver for voltage controlled  regulators Matthias Kaehlcke <mka@chromium.org> - 2017-02-28 10:10 +0100

csiph-web