[PATCH v3 6/7] ARM: dts: bcm283x: switch from &sdhci to &sdhost

From	Gerd Hoffmann <kraxel@redhat.com>
Newsgroups	linux.kernel
Subject	[PATCH v3 6/7] ARM: dts: bcm283x: switch from &sdhci to &sdhost
Date	2017-02-21 10:10 +0100
Message-ID	<tdeCl-t4-1@gated-at.bofh.it> (permalink)
References	<tdeCl-t4-3@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

sdcard access with the sdhost controller is faster.

Read access (dd with 64k blocks on rpi2):
   CONFIG_MMC_SDHCI_IPROC: 11-12 MB/s
   CONFIG_MMC_BCM2835:     19-20 MB/s

Differences on write access are pretty much in the noise.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Eric Anholt <eric@anholt.net>
---
 arch/arm/boot/dts/bcm2835-rpi.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index 7d89af2..e6beecb 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -65,13 +65,13 @@
 &sdhci {
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_gpio48>;
-	status = "okay";
 	bus-width = <4>;
 };
 
 &sdhost {
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdhost_gpio48>;
+	status = "okay";
 	bus-width = <4>;
 };
 
-- 
1.8.3.1

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

[PATCH v3 6/7] ARM: dts: bcm283x: switch from &sdhci to &sdhost Gerd Hoffmann <kraxel@redhat.com> - 2017-02-21 10:10 +0100

csiph-web