Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1582213

Re: [PATCH v13 06/12] usb: xhci: use bus->sysdev for DMA configuration

Show key headers only | View raw

On Wed, Feb 15, 2017 at 01:51:31PM +0200, Felipe Balbi wrote:
> 
> Hi,
> 
> Roger Quadros <rogerq@ti.com> writes:
> >>>>>>>> Why are we using sysdev to read DT property? We should be using the
> >>>>>>>> XHCI device (&pdev->dev) here, no?
> >>>>>>>
> >>>>>>> If I remember correctly, this is one of the cases where pdev does not
> >>>>>>> have a device node attached to it because it was created by the driver
> >>>>>>> of the parent device on the fly in case of dwc3. When you have a pure xhci
> >>>>>>> device in DT, the two pointers are the same.
> >>>>>>
> >>>>>> From drivers/usb/dwc3/host.c
> >>>>>>
> >>>>>>>         if (dwc->usb3_lpm_capable) {
> >>>>>>>                 props[0].name = "usb3-lpm-capable";
> >>>>>>>                 ret = platform_device_add_properties(xhci, props);
> >>>>>>>                 if (ret) {
> >>>>>>>                         dev_err(dwc->dev, "failed to add properties to xHCI\n");
> >>>>>>>                         goto err1;
> >>>>>>>                 }
> >>>>>>>         }
> >>>>>>
> >>>>>> So it is setting the usb3-lpm-capable property into the xhci platform device
> >>>>>> and we should be reading the property from there.
> >>>>
> >>>> Why dwc3 needs another "snps,usb3_lpm_capable"? Why not using
> >>>> "usb3-lpm-capable" at firmware directly?
> >>>
> >>> dwc3 is not setting "snps,usb3_lpm_capable" but "usb3-lpm-capable" for the
> >>> xhci platform device.
> >>>
> >>> What did you mean by firmware? Did you mean something like BIOS?
> >>> At least TI platforms don't use any firmware like BIOS. So dwc3 driver
> >>> needs to create a platform device for xhci on the fly and set the DT properties.
> >>>
> >> 
> >> By readying code, the dwc3 calls dwc3_get_properties to set
> >> dwc->usb3_lpm_capable, and at dwc3/host.c, it sets property
> >> "usb3-lpm-capable" according to this flag, why not let common
> >> code xhci-plat.c to get this property from sysdev which is DT
> >> nodes for dwc3?
> >> 
> >
> > Felipe, any comments?
> 
> Won't work. We have quirk flags which are based on DWC3's revision which
> is not accessible by xhci-plat. Also, we can't call
> device_add_property() because it's not really *adding*. It's *setting*,
> meaning that we would loose all other properties.
> 

Sorry, I am not clear by reading the code, here we just discuss
"usb3-lpm-capable" property from DT or other firmwares.

-- 

Best Regards,
Peter Chen

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

Re: [PATCH v13 06/12] usb: xhci: use bus->sysdev for DMA  configuration Roger Quadros <rogerq@ti.com> - 2017-02-14 11:40 +0100
  Re: [PATCH v13 06/12] usb: xhci: use bus->sysdev for DMA configuration Arnd Bergmann <arnd@arndb.de> - 2017-02-14 12:50 +0100
    Re: [PATCH v13 06/12] usb: xhci: use bus->sysdev for DMA  configuration Roger Quadros <rogerq@ti.com> - 2017-02-14 13:30 +0100
      Re: [PATCH v13 06/12] usb: xhci: use bus->sysdev for DMA configuration Arnd Bergmann <arnd@arndb.de> - 2017-02-14 14:00 +0100
        Re: [PATCH v13 06/12] usb: xhci: use bus->sysdev for DMA  configuration Peter Chen <hzpeterchen@gmail.com> - 2017-02-15 02:40 +0100
          Re: [PATCH v13 06/12] usb: xhci: use bus->sysdev for DMA  configuration Roger Quadros <rogerq@ti.com> - 2017-02-15 09:20 +0100
            Re: [PATCH v13 06/12] usb: xhci: use bus->sysdev for DMA  configuration Peter Chen <hzpeterchen@gmail.com> - 2017-02-15 10:00 +0100
              Re: [PATCH v13 06/12] usb: xhci: use bus->sysdev for DMA  configuration Roger Quadros <rogerq@ti.com> - 2017-02-15 11:20 +0100
                Re: [PATCH v13 06/12] usb: xhci: use bus->sysdev for DMA configuration Felipe Balbi <balbi@kernel.org> - 2017-02-15 13:00 +0100
                Re: [PATCH v13 06/12] usb: xhci: use bus->sysdev for DMA  configuration Peter Chen <hzpeterchen@gmail.com> - 2017-02-16 02:30 +0100

csiph-web