Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1579697

[Patch 2/2] media: ti-vpe: vpe: allow use of user specified stride

Show all headers | View raw

Bytesperline/stride was always overwritten by VPE to the most
adequate value based on needed alignment.

However in order to make use of arbitrary size DMA buffer it
is better to use the user space provide stride instead.

The driver will still calculate an appropriate stride but will
use the provided one when it is larger than the calculated one.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 drivers/media/platform/ti-vpe/vpe.c | 28 ++++++++++++++++++++--------
 1 file changed, 20 insertions(+), 8 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 2dd67232b3bc..c47151495b6f 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -1597,6 +1597,7 @@ static int __vpe_try_fmt(struct vpe_ctx *ctx, struct v4l2_format *f,
 	struct v4l2_plane_pix_format *plane_fmt;
 	unsigned int w_align;
 	int i, depth, depth_bytes, height;
+	unsigned int stride = 0;
 
 	if (!fmt || !(fmt->types & type)) {
 		vpe_err(ctx->dev, "Fourcc format (0x%08x) invalid.\n",
@@ -1683,16 +1684,27 @@ static int __vpe_try_fmt(struct vpe_ctx *ctx, struct v4l2_format *f,
 		plane_fmt = &pix->plane_fmt[i];
 		depth = fmt->vpdma_fmt[i]->depth;
 
-		if (i == VPE_LUMA)
-			plane_fmt->bytesperline = (pix->width * depth) >> 3;
-		else
-			plane_fmt->bytesperline = pix->width;
+		stride = (pix->width * fmt->vpdma_fmt[VPE_LUMA]->depth) >> 3;
+		if (stride > plane_fmt->bytesperline)
+			plane_fmt->bytesperline = stride;
+
+		plane_fmt->bytesperline = ALIGN(plane_fmt->bytesperline,
+						VPDMA_STRIDE_ALIGN);
 
-		if (pix->num_planes == 1 && fmt->coplanar)
-			depth += fmt->vpdma_fmt[VPE_CHROMA]->depth;
-		plane_fmt->sizeimage =
-				(pix->height * pix->width * depth) >> 3;
+		if (i == VPE_LUMA) {
+			plane_fmt->sizeimage = pix->height *
+					       plane_fmt->bytesperline;
 
+			if (pix->num_planes == 1 && fmt->coplanar)
+				plane_fmt->sizeimage += pix->height *
+					plane_fmt->bytesperline *
+					fmt->vpdma_fmt[VPE_CHROMA]->depth >> 3;
+
+		} else { /* i == VIP_CHROMA */
+			plane_fmt->sizeimage = (pix->height *
+					       plane_fmt->bytesperline *
+					       depth) >> 3;
+		}
 		memset(plane_fmt->reserved, 0, sizeof(plane_fmt->reserved));
 	}
 
-- 
2.9.0

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

[Patch 2/2] media: ti-vpe: vpe: allow use of user specified stride Benoit Parrot <bparrot@ti.com> - 2017-02-13 14:10 +0100
  Re: [Patch 2/2] media: ti-vpe: vpe: allow use of user specified  stride Tomi Valkeinen <tomi.valkeinen@ti.com> - 2017-02-15 12:30 +0100
    Re: [Patch 2/2] media: ti-vpe: vpe: allow use of user specified  stride Benoit Parrot <bparrot@ti.com> - 2017-02-15 15:40 +0100

csiph-web