Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1581045
| From | Chris Zhong <zyw@rock-chips.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH v2 11/11] drm/rockchip/dsi: fix insufficient bandwidth of some panel |
| Date | 2017-02-15 05:20 +0100 |
| Message-ID | <taZeq-2Ri-5@gated-at.bofh.it> (permalink) |
| References | <t0coF-7kg-1@gated-at.bofh.it> <t0cym-7r8-29@gated-at.bofh.it> <t0fcS-NQ-3@gated-at.bofh.it> <t0ypb-5hh-11@gated-at.bofh.it> <t0zEC-63y-7@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
Hi John
On 01/17/2017 06:54 PM, John Keeping wrote:
> On Tue, 17 Jan 2017 17:31:53 +0800, Chris Zhong wrote:
>
>> On 01/16/2017 08:44 PM, John Keeping wrote:
>>> On Mon, 16 Jan 2017 18:08:31 +0800, Chris Zhong wrote:
>>>
>>>> Set the lanes bps to 1 / 0.9 times of pclk, the margin is not enough
>>>> for some panel, it will cause the screen display is not normal, so
>>>> increases the badnwidth to 1 / 0.8.
>>>>
>>>> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
>>>>
>>>> ---
>>>>
>>>> drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 4 ++--
>>>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
>>>> index 9dfa73d..5a973fe 100644
>>>> --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
>>>> +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
>>>> @@ -501,8 +501,8 @@ static int dw_mipi_dsi_get_lane_bps(struct dw_mipi_dsi *dsi)
>>>>
>>>> mpclk = DIV_ROUND_UP(dsi->mode->clock, MSEC_PER_SEC);
>>>> if (mpclk) {
>>>> - /* take 1 / 0.9, since mbps must big than bandwidth of RGB */
>>>> - tmp = mpclk * (bpp / dsi->lanes) * 10 / 9;
>>>> + /* take 1 / 0.8, since mbps must big than bandwidth of RGB */
>>>> + tmp = mpclk * (bpp / dsi->lanes) * 10 / 8;
>>> This and patch 9 are just hacking around the underlying problem in order
>>> to make particular panels work. I'm pretty sure the actual issue is the
>>> use of hardcoded values when configuring the PHY, since the PHY
>>> parameters are specified in clock cycles but the MIPI spec requires
>>> absolute time durations.
>>>
>>> I posted a series addressing this a while ago, although I screwed up
>>> sending it so some patches were included twice and since no one
>>> expressed any interest I didn't post a cleaned up version.
>>>
>>> The relevant patch is here:
>>>
>>> https://patchwork.kernel.org/patch/9340193/
>> Thanks very much, your patches are very useful for me. It looks your
>> method is correct.
>> And I am very confused why Mark Yao and me did not receive your patches
>> before,
>> although we have subscribed the <linux-rockchip@lists.infradead.org>.
>>
>> In addition, could you tell me which device ware you testing with these
>> mipi patches.
>> I going to test them these day.
> I'm using RK3288 and I tested my patches with three different MIPI
> displays, two of which require commands to be sent in order to set up
> the panel.
>
> Thanks for testing the patches.
>
>
> John
I think we really need this patch, one mipi panel hit this problem
again, with all your 24 patches
and my 6 MIPI DSI patches
So I will update my series to v7, and add this patch into it.
>
>
Back to linux.kernel | Previous | Next | Find similar | Unroll thread
Re: [PATCH v2 11/11] drm/rockchip/dsi: fix insufficient bandwidth of some panel Chris Zhong <zyw@rock-chips.com> - 2017-02-15 05:20 +0100
csiph-web