Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1680398

Re: [PATCH v6 2/3] media: i2c: adv748x: add adv748x driver

Show all headers | View raw

Hi Hans,

On 03/07/17 15:45, Kieran Bingham wrote:
> Hi Hans,
> 
> Thanks for your review,
> 
> On 03/07/17 14:51, Hans Verkuil wrote:
>> On 06/27/2017 05:03 PM, Kieran Bingham wrote:
>>> From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
>>>
>>> Provide support for the ADV7481 and ADV7482.

...

>>> +/* -----------------------------------------------------------------------------
>>> + * HDMI and CP
>>> + */
>>> +
>>> +#define ADV748X_HDMI_MIN_WIDTH        640
>>> +#define ADV748X_HDMI_MAX_WIDTH        1920
>>> +#define ADV748X_HDMI_MIN_HEIGHT        480
>>> +#define ADV748X_HDMI_MAX_HEIGHT        1200
>>> +#define ADV748X_HDMI_MIN_PIXELCLOCK    0        /* unknown */
>>
>> 0 makes no sense. Something like 13000000 would work better (pixelclock rate for
>> V4L2_DV_BT_CEA_720X480I59_94 is 13500000).
> 
> This is another one that must have got lost somehow - you'd already told me this
> and I'm really sure I changed it to the value you suggested ...
> 
> /me is confused at code loss - Must have been a rebase gone bad. :-(
> 
> 
>>> +#define ADV748X_HDMI_MAX_PIXELCLOCK    162000000
>>
>> You probably based that on the 1600x1200p60 format?
> 
> No idea I'm afraid - it's the value that was set when I recieved the driver...
> 
>>
>> 162MHz is a bit low for an adv receiver. The adv7604 and adv8742 have a max rate
>> of 225 MHz.
>> This should be documented in the datasheet.
> 
> Hrm ... haven't found it yet - I'll keep digging....


I've found this as the most relevant reference:

================================================================================
The ADV7481 HDMI capable receiver supports a maximum pixel clock frequency of
162 MHz, allowing HDTV formats up to 1080p, and display resolutions up to UXGA
(1600 × 1200 at 60 Hz). The device integrates a consumer electronics control
(CEC) controller that supports the capability discovery and control (CDC)
feature. The HDMI input port has dedicated 5 V detect and Hot PlugTM assert pins.
================================================================================

So that certainly looks like 162 MHz is the correct value.

>> Besides, you need a bit of margin since detected pixelclock rates can be a bit off.

Does that mean you would you recommend adding 0.5 MHz to the 162 MHz in a
similar way as the minimum, or keep at 162 MHz ?

(I'm assuming stay at 162 MHz, as the 7604 is set at 225MHz)

--
Regards

Kieran

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH v6 0/3] ADV748x HDMI/Analog video receiver Kieran Bingham <kbingham@kernel.org> - 2017-06-27 17:10 +0200
  [PATCH v6.1 1/3] media: adv748x: Add adv7481, adv7482 bindings Kieran Bingham <kbingham@kernel.org> - 2017-06-29 12:00 +0200
  Re: [PATCH v6 2/3] media: i2c: adv748x: add adv748x driver Hans Verkuil <hverkuil@xs4all.nl> - 2017-07-03 16:00 +0200
    Re: [PATCH v6 2/3] media: i2c: adv748x: add adv748x driver Hans Verkuil <hverkuil@xs4all.nl> - 2017-07-03 17:00 +0200
    Re: [PATCH v6 2/3] media: i2c: adv748x: add adv748x driver Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> - 2017-07-03 17:10 +0200
      Re: [PATCH v6 2/3] media: i2c: adv748x: add adv748x driver Hans Verkuil <hverkuil@xs4all.nl> - 2017-07-03 18:30 +0200

csiph-web