Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1678706

[PATCH v2 1/4] dt-bindings: pwm-backlight: add pwm-delay-us property

From Enric Balletbo i Serra <enric.balletbo@collabora.com>
Newsgroups linux.kernel
Subject [PATCH v2 1/4] dt-bindings: pwm-backlight: add pwm-delay-us property
Date 2017-06-30 13:30 +0200
Message-ID <tY2hz-4Qj-3@gated-at.bofh.it> (permalink)
Organization linux.* mail to news gateway

Show all headers | View raw


From: huang lin <hl@rock-chips.com>

Add a pwm-delay-us property to specify the delay between setting an
initial (non-zero) PWM value and enabling the backlight, and also the
delay between disabling the backlight and setting PWM value to 0.

Signed-off-by: huang lin <hl@rock-chips.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
Changes since v1:
 - As suggested by Daniel Thompson
   - Do not assume power-on delay and power-off delay will be the same

v1: https://lkml.org/lkml/2017/6/28/219

 Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt
index 764db86..49b037e 100644
--- a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt
+++ b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt
@@ -17,6 +17,11 @@ Optional properties:
                "pwms" property (see PWM binding[0])
   - enable-gpios: contains a single GPIO specifier for the GPIO which enables
                   and disables the backlight (see GPIO binding[1])
+  - pwm-delay-us: delay between setting an initial (non-zero) PWM value and
+                  enabling the backlight, and also the delay between disabling
+                  the backlight and setting PWM value to 0.
+                  The 1st cell is the pre-delay in micro seconds.
+                  The 2nd cell is the post-delay in micro seconds.
 
 [0]: Documentation/devicetree/bindings/pwm/pwm.txt
 [1]: Documentation/devicetree/bindings/gpio/gpio.txt
@@ -32,4 +37,5 @@ Example:
 
 		power-supply = <&vdd_bl_reg>;
 		enable-gpios = <&gpio 58 0>;
+		pwm-delay-us = <10000 10000>;
 	};
-- 
2.9.3

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread


Thread

[PATCH v2 1/4] dt-bindings: pwm-backlight: add pwm-delay-us property Enric Balletbo i Serra <enric.balletbo@collabora.com> - 2017-06-30 13:30 +0200
  Re: [PATCH v2 1/4] dt-bindings: pwm-backlight: add pwm-delay-us  property Pavel Machek <pavel@ucw.cz> - 2017-06-30 13:30 +0200
  [PATCH v2 2/4] pwm-backlight: add support for pwm-delay-us property Enric Balletbo i Serra <enric.balletbo@collabora.com> - 2017-06-30 13:30 +0200
  [PATCH v2 4/4] ARM: dts: rockchip: add pwm-delay-us backlight setting. Enric Balletbo i Serra <enric.balletbo@collabora.com> - 2017-06-30 13:30 +0200

csiph-web