Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1678063

Re: [GIT PULL rcu/next] RCU commits for 4.13

Show all headers | View raw

On Thu, Jun 29, 2017 at 11:17:26AM +0800, Boqun Feng wrote:
> On Wed, Jun 28, 2017 at 05:45:56PM -0700, Paul E. McKenney wrote:
> > On Wed, Jun 28, 2017 at 05:05:46PM -0700, Linus Torvalds wrote:
> > > On Wed, Jun 28, 2017 at 4:54 PM, Paul E. McKenney
> > > <paulmck@linux.vnet.ibm.com> wrote:
> > > >
> > > > Linus, are you dead-set against defining spin_unlock_wait() to be
> > > > spin_lock + spin_unlock?  For example, is the current x86 implementation
> > > > of spin_unlock_wait() really a non-negotiable hard requirement?  Or
> > > > would you be willing to live with the spin_lock + spin_unlock semantics?
> > > 
> > > So I think the "same as spin_lock + spin_unlock" semantics are kind of insane.
> > > 
> > > One of the issues is that the same as "spin_lock + spin_unlock" is
> > > basically now architecture-dependent. Is it really the
> > > architecture-dependent ordering you want to define this as?
> > > 
> > > So I just think it's a *bad* definition. If somebody wants something
> > > that is exactly equivalent to spin_lock+spin_unlock, then dammit, just
> > > do *THAT*. It's completely pointless to me to define
> > > spin_unlock_wait() in those terms.
> > > 
> > > And if it's not equivalent to the *architecture* behavior of
> > > spin_lock+spin_unlock, then I think it should be descibed in terms
> > > that aren't about the architecture implementation (so you shouldn't
> > > describe it as "spin_lock+spin_unlock", you should describe it in
> > > terms of memory barrier semantics.
> > > 
> > > And if we really have to use the spin_lock+spinunlock semantics for
> > > this, then what is the advantage of spin_unlock_wait at all, if it
> > > doesn't fundamentally avoid some locking overhead of just taking the
> > > spinlock in the first place?
> > > 
> > > And if we can't use a cheaper model, maybe we should just get rid of
> > > it entirely?
> > > 
> > > Finally: if the memory barrier semantics are exactly the same, and
> > > it's purely about avoiding some nasty contention case, I think the
> > > concept is broken - contention is almost never an actual issue, and if
> > > it is, the problem is much deeper than spin_unlock_wait().
> > 
> > All good points!
> > 
> > I must confess that your sentence about getting rid of spin_unlock_wait()
> > entirely does resonate with me, especially given the repeated bouts of
> > "but what -exactly- is it -supposed- to do?" over the past 18 months
> > or so.  ;-)
> > 
> > Just for completeness, here is a list of the definitions that have been
> > put forward, just in case it inspires someone to come up with something
> > better:
> > 
> > 1.	spin_unlock_wait() provides only acquire semantics.  Code
> > 	placed after the spin_unlock_wait() will see the effects of
> > 	all previous critical sections, but there is no guarantees for
> > 	subsequent critical sections.  The x86 implementation provides
> > 	this.  I -think- that the ARM and PowerPC implementations could
> > 	get rid of a memory-barrier instruction and still provide this.
> > 
> 
> Yes, except we still need a smp_lwsync() in powerpc's
> spin_unlock_wait().
> 
> And FWIW, the two smp_mb()s in spin_unlock_wait() on PowerPC exist there
> just because when Peter worked on commit 726328d92a42, we decided to let
> the fix for spin_unlock_wait() on PowerPC(i.e. commit 6262db7c088bb ) go
> into the tree first to avoid some possible conflicts.  And.. I forgot to
> do the clean-up for an aquire-semantics spin_unlock_wait() later.. ;-)
> 
> I could send out the necessary fix once we have a conclusion for the
> semantics part.

If we end up still having spin_unlock_wait(), I will be happy to take
you up on that.

							Thanx, Paul

> Regards,
> Boqun
> 
> > 2.	As #1 above, but a "smp_mb();spin_unlock_wait();" provides the
> > 	additional guarantee that code placed before this construct is
> > 	seen by all subsequent critical sections.  The x86 implementation
> > 	provides this, as do ARM and PowerPC, but it is not clear that all
> > 	architectures do.  As Alan noted, this is an extremely unnatural
> > 	definition for the current memory model.
> > 
> > 3.	[ Just for completeness, yes, this is off the table! ]  The
> > 	spin_unlock_wait() has the same semantics as a spin_lock()
> > 	followed immediately by a spin_unlock().
> > 
> > 4.	spin_unlock_wait() is analogous to synchronize_rcu(), where
> > 	spin_unlock_wait()'s "read-side critical sections" are the lock's
> > 	normal critical sections.  This was the first definition I heard
> > 	that made any sense to me, but it turns out to be equivalent
> > 	to #3.	Thus, also off the table.
> > 
> > Does anyone know of any other possible definitions?
> > 
> > 							Thanx, Paul
> > 

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

Re: [GIT PULL rcu/next] RCU commits for 4.13 "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> - 2017-06-27 23:00 +0200
  Re: [GIT PULL rcu/next] RCU commits for 4.13 Linus Torvalds <torvalds@linux-foundation.org> - 2017-06-27 23:50 +0200
    Re: [GIT PULL rcu/next] RCU commits for 4.13 "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> - 2017-06-28 01:40 +0200
      Re: [GIT PULL rcu/next] RCU commits for 4.13 Alan Stern <stern@rowland.harvard.edu> - 2017-06-28 17:40 +0200
        Re: [GIT PULL rcu/next] RCU commits for 4.13 "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> - 2017-06-28 20:00 +0200
          Re: [GIT PULL rcu/next] RCU commits for 4.13 Alan Stern <stern@rowland.harvard.edu> - 2017-06-28 22:20 +0200
            Re: [GIT PULL rcu/next] RCU commits for 4.13 Linus Torvalds <torvalds@linux-foundation.org> - 2017-06-29 02:30 +0200
              Re: [GIT PULL rcu/next] RCU commits for 4.13 "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> - 2017-06-29 02:50 +0200
                Re: [GIT PULL rcu/next] RCU commits for 4.13 Boqun Feng <boqun.feng@gmail.com> - 2017-06-29 05:20 +0200
                Re: [GIT PULL rcu/next] RCU commits for 4.13 "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> - 2017-06-29 20:50 +0200
                Re: [GIT PULL rcu/next] RCU commits for 4.13 Will Deacon <will.deacon@arm.com> - 2017-06-29 13:40 +0200
              Re: [GIT PULL rcu/next] RCU commits for 4.13 Will Deacon <will.deacon@arm.com> - 2017-06-29 13:40 +0200
                Re: [GIT PULL rcu/next] RCU commits for 4.13 Alan Stern <stern@rowland.harvard.edu> - 2017-06-29 18:00 +0200
                Re: [GIT PULL rcu/next] RCU commits for 4.13 "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> - 2017-06-29 20:20 +0200
                Re: [GIT PULL rcu/next] RCU commits for 4.13 Boqun Feng <boqun.feng@gmail.com> - 2017-06-30 04:50 +0200
                Re: [GIT PULL rcu/next] RCU commits for 4.13 "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> - 2017-06-30 06:10 +0200
                Re: [GIT PULL rcu/next] RCU commits for 4.13 Boqun Feng <boqun.feng@gmail.com> - 2017-06-30 07:20 +0200
                Re: [GIT PULL rcu/next] RCU commits for 4.13 "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> - 2017-06-30 19:40 +0200
                Re: [GIT PULL rcu/next] RCU commits for 4.13 "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> - 2017-06-29 20:50 +0200
            Re: [GIT PULL rcu/next] RCU commits for 4.13 "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> - 2017-06-29 02:30 +0200

csiph-web