Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1674620
| From | Jonathan Liu <net147@gmail.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [linux-sunxi] [PATCH v4 1/6] clk: sunxi-ng: div: Add support for fixed post-divider |
| Date | 2017-06-26 12:20 +0200 |
| Message-ID | <tWzhE-13H-7@gated-at.bofh.it> (permalink) |
| References | <tWmNr-1oF-9@gated-at.bofh.it> <tWmNs-1oF-29@gated-at.bofh.it> <tWnTc-2hR-25@gated-at.bofh.it> <tWve1-6MA-1@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
Hi Priit,
On 26 June 2017 at 15:53, Priit Laes <plaes@plaes.org> wrote:
> On Mon, Jun 26, 2017 at 08:05:16AM +1000, Jonathan Liu wrote:
>> Hi Priit,
>>
>> This is showing from clock rate of 171428572 in the output of "cat
>> /sys/kernel/debug/clk/clk_summary" for pll-periph-sata.
>> The clock rate should be 100000000 (100 MHz) when read from the hardware.
>
> This is what I see on Cubietruck. Can you check with sunxi-ccu-wip branch?
>
> $ cat /sys/kernel/debug/clk/clk_summary |grep -i sata
> pll-periph-sata 1 1 100000000 0 0
> sata 1 1 100000000 0 0
> ahb-sata 1 1 300000000 0 0
>
I checked with your sunxi-ccu-wip branch and I get the same results as
you. My branch seems out of date.
>>
>> On 26 June 2017 at 06:45, Priit Laes <plaes@plaes.org> wrote:
>> > SATA clock on sun4i/sun7i is of type (parent) / M / 6 where
>> > 6 is fixed post-divider.
>> >
>> > Signed-off-by: Priit Laes <plaes@plaes.org>
>> > ---
>> > drivers/clk/sunxi-ng/ccu_div.c | 12 ++++++++++--
>> > drivers/clk/sunxi-ng/ccu_div.h | 3 ++-
>> > 2 files changed, 12 insertions(+), 3 deletions(-)
>> >
>> > diff --git a/drivers/clk/sunxi-ng/ccu_div.c b/drivers/clk/sunxi-ng/ccu_div.c
>> > index c0e5c10..de30e15 100644
>> > --- a/drivers/clk/sunxi-ng/ccu_div.c
>> > +++ b/drivers/clk/sunxi-ng/ccu_div.c
>>
>> Missing handling of fixed_post_div in ccu_div_round_rate.
>> ccu_div_round_rate should multiply the rate by the postdiv before
>> looking up the divider using divider_get_val and divide val by postdiv
>> just before returning.
>>
Ignore the above comment, my branch is out of date.
>> > @@ -62,8 +62,13 @@ static unsigned long ccu_div_recalc_rate(struct clk_hw *hw,
>> > parent_rate = ccu_mux_helper_apply_prediv(&cd->common, &cd->mux, -1,
>> > parent_rate);
>> >
>> > - return divider_recalc_rate(hw, parent_rate, val, cd->div.table,
>> > - cd->div.flags);
>> > + val = divider_recalc_rate(hw, parent_rate, val, cd->div.table,
>> > + cd->div.flags);
>> > +
>> > + if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
>> > + val /= cd->fixed_post_div;
>> > +
>> > + return val;
>> > }
>> >
>> > static int ccu_div_determine_rate(struct clk_hw *hw,
>>
>> > @@ -89,6 +94,9 @@ static int ccu_div_set_rate(struct clk_hw *hw, unsigned long rate,
>> > val = divider_get_val(rate, parent_rate, cd->div.table, cd->div.width,
>> > cd->div.flags);
>> >
>> > + if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
>> > + val *= cd->fixed_post_div;
>> > +
>> > spin_lock_irqsave(cd->common.lock, flags);
>> >
>> > reg = readl(cd->common.base + cd->common.reg);
>>
>> val here is the divider value that is stored in the clock register
>> field not the actual rate so this is incorrect. Instead the rate needs
>> to be multiplied by postdiv just before divider_get_val.
>
> OK, thanks, this one I wasn't really sure about.
>
Please do fix setting the rate though.
>>
>> > diff --git a/drivers/clk/sunxi-ng/ccu_div.h b/drivers/clk/sunxi-ng/ccu_div.h
>> > index 08d0744..f3a5028 100644
>> > --- a/drivers/clk/sunxi-ng/ccu_div.h
>> > +++ b/drivers/clk/sunxi-ng/ccu_div.h
>> > @@ -86,9 +86,10 @@ struct ccu_div_internal {
>> > struct ccu_div {
>> > u32 enable;
>> >
>> > - struct ccu_div_internal div;
>> > + struct ccu_div_internal div;
>> > struct ccu_mux_internal mux;
>> > struct ccu_common common;
>> > + unsigned int fixed_post_div;
>> > };
>> >
>> > #define SUNXI_CCU_DIV_TABLE_WITH_GATE(_struct, _name, _parent, _reg, \
>> > --
>> > git-series 0.9.1
>>
>> Thanks.
>>
>> Regards,
>> Jonathan
Regards,
Jonathan
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH v4 0/6] ARM: sunxi: Convert sun4i/sun7i series SoCs to sunxi-ng CCU Priit Laes <plaes@plaes.org> - 2017-06-25 23:00 +0200
[PATCH v4 5/6] ARM: sun7i: Convert to CCU Priit Laes <plaes@plaes.org> - 2017-06-25 23:00 +0200
Re: [linux-sunxi] [PATCH v4 5/6] ARM: sun7i: Convert to CCU Andre Przywara <andre.przywara@arm.com> - 2017-06-29 13:00 +0200
Re: [linux-sunxi] [PATCH v4 5/6] ARM: sun7i: Convert to CCU Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-06-29 13:50 +0200
Re: [linux-sunxi] [PATCH v4 5/6] ARM: sun7i: Convert to CCU Andre Przywara <andre.przywara@arm.com> - 2017-06-30 15:20 +0200
Re: [linux-sunxi] [PATCH v4 5/6] ARM: sun7i: Convert to CCU Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-06-29 14:00 +0200
[PATCH v4 1/6] clk: sunxi-ng: div: Add support for fixed post-divider Priit Laes <plaes@plaes.org> - 2017-06-25 23:00 +0200
Re: [linux-sunxi] [PATCH v4 1/6] clk: sunxi-ng: div: Add support for fixed post-divider Jonathan Liu <net147@gmail.com> - 2017-06-26 00:10 +0200
Re: [linux-sunxi] [PATCH v4 1/6] clk: sunxi-ng: div: Add support for fixed post-divider Priit Laes <plaes@plaes.org> - 2017-06-26 08:00 +0200
Re: [linux-sunxi] [PATCH v4 1/6] clk: sunxi-ng: div: Add support for fixed post-divider Jonathan Liu <net147@gmail.com> - 2017-06-26 12:20 +0200
Re: [PATCH v4 1/6] clk: sunxi-ng: div: Add support for fixed post-divider Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-06-27 11:50 +0200
Re: [PATCH v4 1/6] clk: sunxi-ng: div: Add support for fixed post-divider Priit Laes <plaes@plaes.org> - 2017-06-28 20:10 +0200
Re: [PATCH v4 1/6] clk: sunxi-ng: div: Add support for fixed post-divider Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-06-29 09:40 +0200
[PATCH v4 3/6] dt-bindings: List devicetree binding for the CCU of Allwinner A20 Priit Laes <plaes@plaes.org> - 2017-06-25 23:00 +0200
[PATCH v4 6/6] ARM: sun4i: Convert to CCU Priit Laes <plaes@plaes.org> - 2017-06-25 23:00 +0200
Re: [PATCH v4 6/6] ARM: sun4i: Convert to CCU Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-06-30 12:00 +0200
csiph-web