Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1675262

Re: [PATCH 1/2] drivers/watchdog: Document new aspeed optional dev tree properties.

Show all headers | View raw

On Wed, Jun 14, 2017 at 6:08 AM, Christopher Bostic
<cbostic@linux.vnet.ibm.com> wrote:
> Describe new optional property 'external-signal'.  When present in the
> system device tree an exernal signal is generated on watchdog timeout.
>
> Describe new optional property 'no-system-reset'.  When present in the
> system device tree no system reset is to occur on watchdog timeout.
> System reset in this case is managed by one of the other watchogs
> available.
>
> Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
> ---
>  Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt | 11 +++++++++++
>  1 file changed, 11 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
> index c5e74d7..4099ea5 100644
> --- a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
> +++ b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
> @@ -8,9 +8,20 @@ Required properties:
>   - reg: physical base address of the controller and length of memory mapped
>     region
>
> +Optional properties:
> + - external-signal: If the property is present then an external signal is to
> +   be generated on watchdog timeout.  If absent, external signal is not
> +   generated.
> +
> + - no-system-reset: If the property is present then system will not be reset
> +   on watchdog timeout. In this case one of the other watchdogs will handle
> +   reset.  If absent then the watchdog resets the system on timeout.

I'm not sure that this describes the hardware. The datasheet says:

Whenever timeout ocurs, WDT can program to generate 6 types of signals:

 * ARM reset signal: to reset ARM CPU only
 * SOC reset signal: to reset SOC part function
 * System reset signal: to reset full chip
 * Interrupt signal: to interrupt CPU
 * Eternal signal: to external reset counter (only WDT1 and WDT2)
 * Alternate boot signal: to boot from alternate block

I think your bindings should describe these modes where possible.

Cheers,

Joel


> +
>  Example:
>
>         wdt1: watchdog@1e785000 {
>                 compatible = "aspeed,ast2400-wdt";
>                 reg = <0x1e785000 0x1c>;
> +               external-signal;
> +               no-system-reset;
>         };
> --
> 1.8.2.2
>

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

Re: [PATCH 1/2] drivers/watchdog: Document new aspeed optional dev  tree properties. Joel Stanley <joel@jms.id.au> - 2017-06-27 05:10 +0200
  Re: [PATCH 1/2] drivers/watchdog: Document new aspeed optional dev  tree properties. Christopher Bostic <cbostic@linux.vnet.ibm.com> - 2017-06-27 21:50 +0200

csiph-web