Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1673449

Re: [PATCH] perf/core: fix group {cpu,task} validation

Show all headers | View raw

Hi,

On Fri, Jun 23, 2017 at 08:56:38AM +0800, zhouchengming wrote:
> On 2017/6/22 22:41, Mark Rutland wrote:
> >Regardless of which events form a group, it does not make sense for the
> >events to target different tasks and/or CPUs, as this leaves the group
> >inconsistent and impossible to schedule. The core perf code assumes that
> >these are consistent across (successfully intialised) groups.
> >
> >Core perf code only verifies this when moving SW events into a HW
> >context. Thus, we can violate this requirement for pure SW groups and
> >pure HW groups, unless the relevant PMU driver happens to perform this
> >verification itself. These mismatched groups subsequently wreak havoc
> >elsewhere.
> >
> >For example, we handle watchpoints as SW events, and reserve watchpoint
> >HW on a per-cpu basis at pmu::event_init() time to ensure that any event
> >that is initialised is guaranteed to have a slot at pmu::add() time.
> >However, the core code only checks the group leader's cpu filter (via
> >event_filter_match()), and can thus install follower events onto CPUs
> >violating thier (mismatched) CPU filters, potentially installing them
> >into a CPU without sufficient reserved slots.

[...]

> >Fix this by validating this requirement regardless of whether we're
> >moving events.
> >
> >Signed-off-by: Mark Rutland<mark.rutland@arm.com>
> >Cc: Alexander Shishkin<alexander.shishkin@linux.intel.com>
> >Cc: Arnaldo Carvalho de Melo<acme@kernel.org>
> >Cc: Ingo Molnar<mingo@redhat.com>
> >Cc: Peter Zijlstra<peterz@infradead.org>
> >Cc: Zhou Chengming<zhouchengming1@huawei.com>
> >Cc: linux-kernel@vger.kernel.org
> >---
> >  kernel/events/core.c | 39 +++++++++++++++++++--------------------
> >  1 file changed, 19 insertions(+), 20 deletions(-)
> >
> >diff --git a/kernel/events/core.c b/kernel/events/core.c
> >index 6c4e523..1dca484 100644
> >--- a/kernel/events/core.c
> >+++ b/kernel/events/core.c
> >@@ -10010,28 +10010,27 @@ static int perf_event_set_clock(struct perf_event *event, clockid_t clk_id)
> >  			goto err_context;
> >
> >  		/*
> >-		 * Do not allow to attach to a group in a different
> >-		 * task or CPU context:
> >+		 * Make sure we're both events for the same CPU;
> >+		 * grouping events for different CPUs is broken; since
> >+		 * you can never concurrently schedule them anyhow.
> >  		 */
> >-		if (move_group) {
> >-			/*
> >-			 * Make sure we're both on the same task, or both
> >-			 * per-cpu events.
> >-			 */
> >-			if (group_leader->ctx->task != ctx->task)
> >-				goto err_context;
> >+		if (group_leader->cpu != event->cpu)
> >+			goto err_context;
> >
> >-			/*
> >-			 * Make sure we're both events for the same CPU;
> >-			 * grouping events for different CPUs is broken; since
> >-			 * you can never concurrently schedule them anyhow.
> >-			 */
> >-			if (group_leader->cpu != event->cpu)
> >-				goto err_context;
> >-		} else {
> >-			if (group_leader->ctx != ctx)
> >-				goto err_context;
> >-		}
> >+		/*
> >+		 * Make sure we're both on the same task, or both
> >+		 * per-cpu events.
> >+		 */
> >+		if (group_leader->ctx->task != ctx->task)
> >+			goto err_context;
> >+
> >+		/*
> >+		 * Do not allow to attach to a group in a different task
> >+		 * or CPU context. If we're moving SW events, we'll fix
> >+		 * this up later, so allow that.
> >+		 */
> >+		if (!move_group&&  group_leader->ctx != ctx)
> >+			goto err_context;
> 
> We don't need to check move_group here, the previous two checks
> already make sure the events are on the same task and the same cpu.

That's not sufficient to ensure that they're the same context, however.

> So when move_group needed, they will be moved to the same taskctx or
> cpuctx then.

Consider the case of two "uncore" PMUs, X and Y. Each has their own
cpuctx. You could open PMU X event with cpu == 0 && !task, and you could
subsequently open a PMU Y event following X with cpu == 0, && !task.

Neither event is a SW event, so we won't set move_group, and thus we
won't move either event.

Each event would be placed in its respective PMU's cpuctx, so
group_leader->ctx != event->ctx. We don't check this again prior to
installing the event, which would go wrong:

perf_install_in_context(ctx, event, event->cpu)
-> __perf_install_in_context()
-> add_event_to_ctx(event, ctx)
-> perf_group_attach(event)
-> WARN_ON_ONCE(group_leader->ctx != event->ctx)

... and subsequently a number of other things could go wrong due to this
mismatch.

We need to keep this check in the !move_group case.

Thanks,
Mark.

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH] perf/core: fix group {cpu,task} validation Mark Rutland <mark.rutland@arm.com> - 2017-06-22 16:50 +0200
  Re: [PATCH] perf/core: fix group {cpu,task} validation zhouchengming <zhouchengming1@huawei.com> - 2017-06-23 03:00 +0200
    Re: [PATCH] perf/core: fix group {cpu,task} validation Mark Rutland <mark.rutland@arm.com> - 2017-06-23 12:10 +0200

csiph-web