[PATCH 4.9 43/60] usb: xhci: Fix USB 3.1 supported protocol parsing

Path	csiph.com!eternal-september.org!feeder.eternal-september.org!aioe.org!news.servidellagleba.it!bofh.it!news.nic.it!robomod
From	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Newsgroups	linux.kernel
Subject	[PATCH 4.9 43/60] usb: xhci: Fix USB 3.1 supported protocol parsing
Date	Mon, 19 Jun 2017 18:10:03 +0200
Message-ID	<tU7px-4Ul-45@gated-at.bofh.it> (permalink)
References	<tU6MO-4pB-3@gated-at.bofh.it>
X-Mailer	git-send-email 2.13.1
User-Agent	quilt/0.65
MIME-Version	1.0
Content-Type	text/plain; charset=UTF-8
Sender	robomod@news.nic.it
List-ID	<linux-kernel.vger.kernel.org>
X-Mailing-List	linux-kernel@vger.kernel.org
Approved	robomod@news.nic.it
Lines	70
Organization	linux.* mail to news gateway
X-Original-Cc	Greg Kroah-Hartman <gregkh@linuxfoundation.org>, stable@vger.kernel.org, YD Tseng <yd_tseng@asmedia.com.tw>, Mathias Nyman <mathias.nyman@linux.intel.com>
X-Original-Date	Mon, 19 Jun 2017 23:17:37 +0800
X-Original-Message-ID	<20170619151646.240042997@linuxfoundation.org>
X-Original-References	<20170619151644.680979056@linuxfoundation.org>
X-Original-Sender	linux-kernel-owner@vger.kernel.org
Xref	csiph.com linux.kernel:1669409

Show key headers only | View raw

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: YD Tseng <yd_tseng@asmedia.com.tw>

commit b72eb8435b25be3a1880264cf32ac91e626ba5ba upstream.

xHCI host controllers can have both USB 3.1 and 3.0 extended speed
protocol lists. If the USB3.1 speed is parsed first and 3.0 second then
the minor revision supported will be overwritten by the 3.0 speeds and
the USB3 roothub will only show support for USB 3.0 speeds.

This was the case with a xhci controller with the supported protocol
capability listed below.
In xhci-mem.c, the USB 3.1 speed is parsed first, the min_rev of usb3_rhub
is set as 0x10.  And then USB 3.0 is parsed.  However, the min_rev of
usb3_rhub will be changed to 0x00. If USB 3.1 device is connected behind
this host controller, the speed of USB 3.1 device just reports 5G speed
using lsusb.

     00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
  00 01 08 00 00 00 00 00 40 00 00 00 00 00 00 00 00
  10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  20 02 08 10 03 55 53 42 20 01 02 00 00 00 00 00 00     //USB 3.1
  30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  40 02 08 00 03 55 53 42 20 03 06 00 00 00 00 00 00     //USB 3.0
  50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  60 02 08 00 02 55 53 42 20 09 0E 19 00 00 00 00 00     //USB 2.0
  70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

This patch fixes the issue by only owerwriting the minor revision if
it is higher than the existing one.

[reword commit message -Mathias]
Signed-off-by: YD Tseng <yd_tseng@asmedia.com.tw>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci-mem.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -2123,11 +2123,12 @@ static void xhci_add_in_port(struct xhci
 {
 	u32 temp, port_offset, port_count;
 	int i;
-	u8 major_revision;
+	u8 major_revision, minor_revision;
 	struct xhci_hub *rhub;
 
 	temp = readl(addr);
 	major_revision = XHCI_EXT_PORT_MAJOR(temp);
+	minor_revision = XHCI_EXT_PORT_MINOR(temp);
 
 	if (major_revision == 0x03) {
 		rhub = &xhci->usb3_rhub;
@@ -2141,7 +2142,9 @@ static void xhci_add_in_port(struct xhci
 		return;
 	}
 	rhub->maj_rev = XHCI_EXT_PORT_MAJOR(temp);
-	rhub->min_rev = XHCI_EXT_PORT_MINOR(temp);
+
+	if (rhub->min_rev < minor_revision)
+		rhub->min_rev = minor_revision;
 
 	/* Port offset and count in the third dword, see section 7.2 */
 	temp = readl(addr + 2);

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

[PATCH 4.9 43/60] usb: xhci: Fix USB 3.1 supported protocol parsing Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-19 18:10 +0200

csiph-web