Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1664583

Re: [linux-sunxi] Re: [PATCH v2 10/11] ARM: sun8i: h3: add display engine pipeline for TVE

Show all headers | View raw

[Multipart message — attachments visible in raw view] - view raw

On Sun, Jun 11, 2017 at 02:58:47PM +0800, icenowy@aosc.io wrote:
> 在 2017-06-07 17:42，Maxime Ripard 写道：
> > On Mon, Jun 05, 2017 at 12:01:48AM +0800, Icenowy Zheng wrote:
> > > +	soc {
> > > +		display_clocks: clock@1000000 {
> > > +			compatible = "allwinner,sun8i-a83t-de2-clk";
> > > +			reg = <0x01000000 0x100000>;
> > > +			clocks = <&ccu CLK_BUS_DE>,
> > > +				 <&ccu CLK_DE>;
> > > +			clock-names = "bus",
> > > +				      "mod";
> > > +			resets = <&ccu RST_BUS_DE>;
> > > +			#clock-cells = <1>;
> > > +			#reset-cells = <1>;
> > > +			assigned-clocks = <&ccu CLK_DE>;
> > > +			assigned-clock-parents = <&ccu CLK_PLL_DE>;
> > > +			assigned-clock-rates = <432000000>;
> > > +		};
> > 
> > We discussed that already a few times, but there's no reason to do
> > so. If you need a downstream clock at a particular rate, call
> > clk_set_rate on it, period.
> > 
> > Whether its parent will be coming from PLL_DE or some other more
> > appriopriate clock is not relevant and doesn't make any difference.
> 
> The clock framework is not so smart to deal with these infomations:
> - CLK_PLL_PERIPH should always be 600MHz
> - CLK_TVE should always be 216MHz
> - CLK_DE (in fact CLK_MIXER{0,1}) should be larger than 300MHz (for 4K)

None of what you're doing guarantees what you state above, so I'm not
really sure what your point is.

> So we have to specify CLK_DE to be 432MHz, and then it will set
> CLK_PLL_DE to this value, then the CLK_TVE can be set to 216MHz with
> divider 2.

Yes, but it works by accident. Any clock change somewhere in the same
clock-tree might break whatever you have set in the DT.

Hence why you want to do it within the clock framework and your
driver, not here.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

Re: [linux-sunxi] Re: [PATCH v2 10/11] ARM: sun8i: h3: add display  engine pipeline for TVE icenowy@aosc.io - 2017-06-11 09:00 +0200
  Re: [linux-sunxi] Re: [PATCH v2 10/11] ARM: sun8i: h3: add display  engine pipeline for TVE Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-06-13 10:10 +0200

csiph-web