Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1664163

Re: [PATCH v2 2/4] dt: bindings: Add bindings for bcm2835-aux-intc

Show all headers | View raw

On 06/12/2017 07:25 AM, Phil Elwell wrote:
> Add bindings documentation for brcm,bcm2835-aux-intc and human-readable
> declarations for the BCM2835 AUX IRQs.
> 
> Signed-off-by: Phil Elwell <phil@raspberrypi.org>
> ---
>  .../interrupt-controller/brcm,bcm2835-aux-intc.txt | 28 ++++++++++++++++++++++
>  .../interrupt-controller/bcm2835-aux-intc.h        | 20 ++++++++++++++++
>  2 files changed, 48 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-aux-intc.txt
>  create mode 100644 include/dt-bindings/interrupt-controller/bcm2835-aux-intc.h
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-aux-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-aux-intc.txt
> new file mode 100644
> index 0000000..f3f895c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-aux-intc.txt
> @@ -0,0 +1,28 @@
> +BCM2835 Auxiliary ("AUXIRQ") Interrupt Controller
> +
> +The BCM2835 family of SoCs multiplexes the interrupts for peripherals in
> +the AUX block into a single IRQ. The AUXIRQ register shows the IRQ status
> +of each of the peripherals. Note that there are no masking or clearing
> +facilities - interrupts must be enabled and acknowledged in the
> +individual peripherals.
> +
> +Required properties:
> +- compatible :	     Should be "brcm,bcm2835-aux-intc".
> +- reg :		     Specifies base physical address and size of the registers.
> +- interrupts :	     The interrupt number - see
> +		     bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
> +- interrupt-controller : Identifies the node as an interrupt controller
> +- #interrupt-cells : Specifies the number of cells needed to encode an
> +		     interrupt source. The value shall be 1.
> +
> +  The cell contains the interrupt specifier, as found in
> +  include/dt-bindings/interrupt-controller/bcm2835-aux-intc.h. Valid values
> +  are 0..2.

This last sentence is sort of doomed for failure in case there are
additional interrupts being added in the future, referring to
bcm2835-aux-intc.h seems to be good enough IMHO.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH v2 2/4] dt: bindings: Add bindings for bcm2835-aux-intc Phil Elwell <phil@raspberrypi.org> - 2017-06-12 16:30 +0200
  Re: [PATCH v2 2/4] dt: bindings: Add bindings for bcm2835-aux-intc Florian Fainelli <f.fainelli@gmail.com> - 2017-06-12 20:30 +0200
  Re: [PATCH v2 2/4] dt: bindings: Add bindings for bcm2835-aux-intc Florian Fainelli <f.fainelli@gmail.com> - 2017-06-12 20:30 +0200

csiph-web