Re: [PATCH] ARM: sun8i: h3: Enable EMAC with external PHY on Orange Pi Plus 2E

From	Maxime Ripard <maxime.ripard@free-electrons.com>
Newsgroups	linux.kernel
Subject	Re: [PATCH] ARM: sun8i: h3: Enable EMAC with external PHY on Orange Pi Plus 2E
Date	2017-06-10 11:30 +0200
Message-ID	<tQKSt-5gn-3@gated-at.bofh.it> (permalink)
References	<tQub0-3k4-19@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

[Multipart message — attachments visible in raw view] - view raw

On Fri, Jun 09, 2017 at 11:34:36PM +0800, Chen-Yu Tsai wrote:
> The Orange Pi Plus 2E, unlike the Orange Pi PC and PC Plus which its
> schematics are based on, uses an external Realtek RTL8211E PHY in
> RGMII mode, with a GPIO enabling the regulator for I/O signalling
> power supplies. The PHY's main power supply is enabled by the main
> 5V power supply.
> 
> Add the regulator and PHY nodes, and override the PHY phandle under
> the EMAC node, so that the EMAC works properly on this board.
> 
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>

Applied, thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH] ARM: sun8i: h3: Enable EMAC with external PHY on Orange Pi Plus 2E Chen-Yu Tsai <wens@csie.org> - 2017-06-09 17:40 +0200
  Re: [PATCH] ARM: sun8i: h3: Enable EMAC with external PHY on Orange  Pi Plus 2E Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-06-10 11:30 +0200

csiph-web