Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1660799

Re: [PATCH 2/4] KVM: VMX: avoid double list add with VT-d posted interrupts

Show all headers | View raw

On Tue, Jun 06, 2017 at 12:57:05PM +0200, Paolo Bonzini wrote:
> In some cases, for example involving hot-unplug of assigned
> devices, pi_post_block can forget to remove the vCPU from the
> blocked_vcpu_list.  When this happens, the next call to
> pi_pre_block corrupts the list.
> 
> Fix this in two ways.  First, check vcpu->pre_pcpu in pi_pre_block
> and WARN instead of adding the element twice in the list.  Second,
> always do the list removal in pi_post_block if vcpu->pre_pcpu is
> set (not -1).
> 
> The new code keeps interrupts disabled for the whole duration of
> pi_pre_block/pi_post_block.  This is not strictly necessary, but
> easier to follow.  For the same reason, PI.ON is checked only
> after the cmpxchg, and to handle it we just call the post-block
> code.  This removes duplication of the list removal code.
> 
> Cc: Longpeng (Mike) <longpeng2@huawei.com>
> Cc: Huangweidong <weidong.huang@huawei.com>
> Cc: Gonglei <arei.gonglei@huawei.com>
> Cc: wangxin <wangxinxin.wang@huawei.com>
> Cc: Radim Krčmář <rkrcmar@redhat.com>
> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
> ---
>  arch/x86/kvm/vmx.c | 62 ++++++++++++++++++++++--------------------------------
>  1 file changed, 25 insertions(+), 37 deletions(-)
> 
> diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
> index 747d16525b45..0f4714fe4908 100644
> --- a/arch/x86/kvm/vmx.c
> +++ b/arch/x86/kvm/vmx.c
> @@ -11236,10 +11236,11 @@ static void __pi_post_block(struct kvm_vcpu *vcpu)
>  	struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu);
>  	struct pi_desc old, new;
>  	unsigned int dest;
> -	unsigned long flags;
>  
>  	do {
>  		old.control = new.control = pi_desc->control;
> +		WARN(old.nv != POSTED_INTR_WAKEUP_VECTOR,
> +		     "Wakeup handler not enabled while the VCPU is blocked\n");
>  
>  		dest = cpu_physical_id(vcpu->cpu);
>  
> @@ -11256,14 +11257,10 @@ static void __pi_post_block(struct kvm_vcpu *vcpu)
>  	} while (cmpxchg(&pi_desc->control, old.control,
>  			new.control) != old.control);
>  
> -	if(vcpu->pre_pcpu != -1) {
> -		spin_lock_irqsave(
> -			&per_cpu(blocked_vcpu_on_cpu_lock,
> -			vcpu->pre_pcpu), flags);
> +	if (!WARN_ON_ONCE(vcpu->pre_pcpu == -1)) {
> +		spin_lock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu));
>  		list_del(&vcpu->blocked_vcpu_list);
> -		spin_unlock_irqrestore(
> -			&per_cpu(blocked_vcpu_on_cpu_lock,
> -			vcpu->pre_pcpu), flags);
> +		spin_unlock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu));
>  		vcpu->pre_pcpu = -1;
>  	}
>  }
> @@ -11283,7 +11280,6 @@ static void __pi_post_block(struct kvm_vcpu *vcpu)
>   */
>  static int pi_pre_block(struct kvm_vcpu *vcpu)
>  {
> -	unsigned long flags;
>  	unsigned int dest;
>  	struct pi_desc old, new;
>  	struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu);
> @@ -11293,34 +11289,20 @@ static int pi_pre_block(struct kvm_vcpu *vcpu)
>  		!kvm_vcpu_apicv_active(vcpu))
>  		return 0;
>  
> -	vcpu->pre_pcpu = vcpu->cpu;
> -	spin_lock_irqsave(&per_cpu(blocked_vcpu_on_cpu_lock,
> -			  vcpu->pre_pcpu), flags);
> -	list_add_tail(&vcpu->blocked_vcpu_list,
> -		      &per_cpu(blocked_vcpu_on_cpu,
> -		      vcpu->pre_pcpu));
> -	spin_unlock_irqrestore(&per_cpu(blocked_vcpu_on_cpu_lock,
> -			       vcpu->pre_pcpu), flags);
> +	WARN_ON(irqs_disabled());
> +	local_irq_disable();
> +	if (!WARN_ON_ONCE(vcpu->pre_pcpu != -1)) {
> +		vcpu->pre_pcpu = vcpu->cpu;
> +		spin_lock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu));
> +		list_add_tail(&vcpu->blocked_vcpu_list,
> +			      &per_cpu(blocked_vcpu_on_cpu,
> +				       vcpu->pre_pcpu));
> +		spin_unlock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu));
> +	}
>  
>  	do {
>  		old.control = new.control = pi_desc->control;
>  
> -		/*
> -		 * We should not block the vCPU if
> -		 * an interrupt is posted for it.
> -		 */
> -		if (pi_test_on(pi_desc) == 1) {
> -			spin_lock_irqsave(&per_cpu(blocked_vcpu_on_cpu_lock,
> -					  vcpu->pre_pcpu), flags);
> -			list_del(&vcpu->blocked_vcpu_list);
> -			spin_unlock_irqrestore(
> -					&per_cpu(blocked_vcpu_on_cpu_lock,
> -					vcpu->pre_pcpu), flags);
> -			vcpu->pre_pcpu = -1;
> -
> -			return 1;

[1]

> -		}
> -
>  		WARN((pi_desc->sn == 1),
>  		     "Warning: SN field of posted-interrupts "
>  		     "is set before blocking\n");
> @@ -11345,7 +11327,12 @@ static int pi_pre_block(struct kvm_vcpu *vcpu)
>  	} while (cmpxchg(&pi_desc->control, old.control,
>  			new.control) != old.control);
>  
> -	return 0;
> +	/* We should not block the vCPU if an interrupt is posted for it.  */
> +	if (pi_test_on(pi_desc) == 1)
> +		__pi_post_block(vcpu);

A question on when pi_test_on() is set:

The old code will return 1 if detected (ses [1]), while the new code
does not. Would that matter? (IIUC that decides whether the vcpu will
continue to run?)

> +
> +	local_irq_enable();
> +	return (vcpu->pre_pcpu == -1);

Above we have:

	if (!WARN_ON_ONCE(vcpu->pre_pcpu != -1)) {
		vcpu->pre_pcpu = vcpu->cpu;
                ...
	}

Then can here vcpu->pre_pcpu really be -1?

>  }
>  
>  static int vmx_pre_block(struct kvm_vcpu *vcpu)
> @@ -11361,12 +11348,13 @@ static int vmx_pre_block(struct kvm_vcpu *vcpu)
>  
>  static void pi_post_block(struct kvm_vcpu *vcpu)
>  {
> -	if (!kvm_arch_has_assigned_device(vcpu->kvm) ||
> -		!irq_remapping_cap(IRQ_POSTING_CAP)  ||
> -		!kvm_vcpu_apicv_active(vcpu))
> +	if (vcpu->pre_pcpu == -1)
>  		return;
>  
> +	WARN_ON(irqs_disabled());
> +	local_irq_disable();
>  	__pi_post_block(vcpu);
> +	local_irq_enable();
>  }
>  
>  static void vmx_post_block(struct kvm_vcpu *vcpu)
> -- 
> 2.13.0
> 
> 

A general question to pre_block/post_block handling for PI:

I see that we are handling PI logic mostly in four places:

vmx_vcpu_pi_{load|put}
pi_{pre_post}_block

But do we really need the pre_block/post_block handling? Here's how I
understand when vcpu blocked:

- vcpu_block
  - ->pre_block
  - kvm_vcpu_block [1]
    - schedule()
      - kvm_sched_out
        - vmx_vcpu_pi_put [3]
      - (another process working) ...
      - kvm_sched_in
        - vmx_vcpu_pi_load [4]
  - ->post_block [2]

If so, [1] & [2] will definitely be paired with [3] & [4], then why we
need [3] & [4] at all?

(Though [3] & [4] will also be used when preemption happens, so they
 are required)

Please kindly figure out if I missed anything important...

Thanks,

-- 
Peter Xu

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

Re: [PATCH 2/4] KVM: VMX: avoid double list add with VT-d posted  interrupts Peter Xu <peterx@redhat.com> - 2017-06-08 09:00 +0200
  Re: [PATCH 2/4] KVM: VMX: avoid double list add with VT-d posted  interrupts Paolo Bonzini <pbonzini@redhat.com> - 2017-06-08 09:10 +0200
    Re: [PATCH 2/4] KVM: VMX: avoid double list add with VT-d posted  interrupts Peter Xu <peterx@redhat.com> - 2017-06-08 11:20 +0200
      Re: [PATCH 2/4] KVM: VMX: avoid double list add with VT-d posted  interrupts Paolo Bonzini <pbonzini@redhat.com> - 2017-06-08 13:30 +0200
        Re: [PATCH 2/4] KVM: VMX: avoid double list add with VT-d posted  interrupts Peter Xu <peterx@redhat.com> - 2017-06-09 05:00 +0200
          Re: [PATCH 2/4] KVM: VMX: avoid double list add with VT-d posted  interrupts Paolo Bonzini <pbonzini@redhat.com> - 2017-06-09 09:40 +0200
            Re: [PATCH 2/4] KVM: VMX: avoid double list add with VT-d posted  interrupts Peter Xu <peterx@redhat.com> - 2017-06-09 09:50 +0200

csiph-web